lkml.org 
[lkml]   [2019]   [Jan]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH 0/3] can: flexcan: add imx8qm support
Date

Kindly Ping...

Best Regards,
Joakim Zhang

> -----Original Message-----
> From: Joakim Zhang
> Sent: 2018年12月19日 16:39
> To: mkl@pengutronix.de; linux-can@vger.kernel.org
> Cc: wg@grandegger.com; netdev@vger.kernel.org;
> linux-kernel@vger.kernel.org; dl-linux-imx <linux-imx@nxp.com>; Joakim
> Zhang <qiangqing.zhang@nxp.com>
> Subject: [PATCH 0/3] can: flexcan: add imx8qm support
>
> This patch set intends to add Flexcan support for i.MX8QM platform which
> defaultly supports CAN FD protocol. Although BRS enabled by system reset
> when the driver sets CAN FD mode, now this patch serial does not support BRS
> in the driver. And then I will send patch to enable BRS by changing the register
> to set bit timing.
>
> Dong Aisheng (3):
> can: rx-offload: add CANFD support based on offload
> can: flexcan: add CAN FD mode support
> can: flexcan: add imx8qm support
>
> drivers/net/can/flexcan.c | 114 ++++++++++++++++++++++++++++++---
> drivers/net/can/rx-offload.c | 16 +++--
> include/linux/can/rx-offload.h | 4 +-
> 3 files changed, 117 insertions(+), 17 deletions(-)
>
> --
> 2.17.1

\
 
 \ /
  Last update: 2019-01-17 07:29    [W:0.065 / U:8.280 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site