lkml.org 
[lkml]   [2019]   [Jan]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v1 00/10] cpufreq: Add flag to auto-register as cooling device
On Thu, Jan 17, 2019 at 11:08 AM Rafael J. Wysocki <rafael@kernel.org> wrote:
>
> On Thu, Jan 17, 2019 at 6:49 AM Viresh Kumar <viresh.kumar@linaro.org> wrote:
> >
> > On 14-01-19, 22:04, Amit Kucheria wrote:
> > > Add a flag to be used by cpufreq drivers to tell cpufreq core to
> > > auto-register themselves as a thermal cooling device.
> > >
> > > There series converts over all the drivers except arm_big_little.c.
> > > Tested on SDM845 with the qcom-cpufreq-hw driver. Only compile-tested the
> > > others.
> > >
> > > Things needing fixing:
> > > - Look at how to detect that we're not in IKS mode in arm_big_little's
> > > .ready callback.
> >
> > is_bL_switching_enabled() lets you know if IKS is enabled or not.
> > Set/clear flag conditionally before the cpufreq-driver is registered,
> > based on the output of is_bL_switching_enabled().
> >
> > > - The other pending issue is to fix allmodconfig that leaves us with
> > > CPU_FREQ=y and THERMAL=m (CPU_THERMAL=y). That leads to undefined
> > > references for functions defined in cpu_cooling.c
> >
> > Okay, that's a terrible thing and the solution looks to be rather
> > difficult.
> >
> > For others who may not be aware of the issue here, currently the
> > cpufreq drivers use helpers of cpu_cooling.c (CONFIG_CPU_THERMAL),
> > which uses helpers of the thermal core (CONFIG_THERMAL).
> > CONFIG_THERMAL is defined as tristate and CONFIG_CPU_THERMAL as bool
> > in Kconfigs.
>
> And CONFIG_CPU_THERMAL is defined under "if THERMAL".
>
> > The cpufreq drivers using the cpu_cooling.c file have this in their
> > Kconfig entry:
> >
> > # if CPU_THERMAL is on and THERMAL=m, ARM_BIT_LITTLE_CPUFREQ cannot be =y
> > # depends on !CPU_THERMAL || THERMAL
> >
> >
> > This series now places the cpufreq core in place of the cpufreq driver
> > and it messes up everything. It is not just about allmodconfig, but
> > any configuration which makes the compilation fail.
> >
> > What are the solutions we have now ?
> >
> > 1. Have following for CONFIG_CPU_FREQ
> > depends on !CPU_THERMAL || THERMAL
>
> Sorry, but this makes my teeth hurt.
>
> > The platforms which don't need CPU_THERMAL (like x86) should not
> > enable CPU_THERMAL anymore if they want CONFIG_THERMAL=m.
> >
> > @amit: If this gets accepted, please update the Kconfig entries for
> > all those drivers to not have above lines anymore.
> >
> > - Change CONFIG_THERMAL to bool instead of tristate ?
> >
> > - Anything else ?
>
> The design in the thermal subsystem seems to be upside-down.
> Non-modular code should never be made depend on anything only defined
> in a module.
>
> Would an explicit "select THERMAL" under CPU_THERMAL cause THERMAL to be 'y'?

Alternatively, "depends on THERMAL=y" under CPU_THERMAL should work
too, shouldn't it? "!CPU_THERMAL || THERMAL" would be always true
then, AFAICS.

\
 
 \ /
  Last update: 2019-01-17 11:15    [W:0.049 / U:14.452 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site