[lkml]   [2019]   [Jan]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: use generic DMA mapping code in powerpc V4
Hi All,

I compiled the fixed '257002094bc5935dd63207a380d9698ab81f0775'
(powerpc/dma: use the dma-direct allocator for coherent platforms) today.

git clone git:// -b powerpc-dma.6 a

git checkout 257002094bc5935dd63207a380d9698ab81f0775

Link to the Git:

env LANG=C make CROSS_COMPILE=powerpc-linux-gnu- ARCH=powerpc zImage

env LANG=C make CROSS_COMPILE=powerpc-linux-gnu- ARCH=powerpc uImage

The X1000 boots and the PASEMI onboard ethernet works!

Bad news for the X5000 (P5020 board). U-Boot loads the kernel and the
dtb file. Then the kernel starts but it doesn't find any hard disks


On 15 January 2019 at 4:17PM, Christoph Hellwig wrote:

So 257002094bc5935dd63207a380d9698ab81f0775 above is the fixed version
for the commit - this switched the ifdef in dma.c around that I had
inverted.  Can you try that one instead?  And then move on with the
commits after it in the updated powerpc-dma.6 branch - they are
identical to the original branch except for carrying this fix forward.

 \ /
  Last update: 2019-01-17 10:22    [W:0.220 / U:28.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site