lkml.org 
[lkml]   [2019]   [Jan]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/3] usb: ehci: fsl: Update register accessing for arm/arm64 platforms
Date
arm/arm64's io.h doesn't define clrbits32() and clrsetbits_be32(), which
causing compile failure on some Layerscape Platforms (such as LS1021A and
LS2012A which also integrates FSL EHCI controller). So use
ioread32be()/iowrite32be() instead to make it workable on both
powerpc and arm.

Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
---
Changes in v2:
- Recover writel() calling in code of handling pdata->has_fsl_erratum_a007792
- Remove unnecessary parens
- Move this patch to be first one to avoid breaking the build on ARM.

drivers/usb/host/ehci-fsl.c | 62 ++++++++++++++++++++++++++++--------------
1 files changed, 41 insertions(+), 21 deletions(-)

diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index 0a9fd20..0a867d9 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -23,6 +23,7 @@
#include <linux/platform_device.h>
#include <linux/fsl_devices.h>
#include <linux/of_platform.h>
+#include <linux/io.h>

#include "ehci.h"
#include "ehci-fsl.h"
@@ -50,6 +51,7 @@ static int fsl_ehci_drv_probe(struct platform_device *pdev)
struct resource *res;
int irq;
int retval;
+ u32 tmp;

pr_debug("initializing FSL-SOC USB Controller\n");

@@ -114,17 +116,22 @@ static int fsl_ehci_drv_probe(struct platform_device *pdev)
}

/* Enable USB controller, 83xx or 8536 */
- if (pdata->have_sysif_regs && pdata->controller_ver < FSL_USB_VER_1_6)
- clrsetbits_be32(hcd->regs + FSL_SOC_USB_CTRL,
- CONTROL_REGISTER_W1C_MASK, 0x4);
-
+ if (pdata->have_sysif_regs && pdata->controller_ver < FSL_USB_VER_1_6) {
+ tmp = ioread32be(hcd->regs + FSL_SOC_USB_CTRL);
+ tmp &= ~CONTROL_REGISTER_W1C_MASK;
+ tmp |= 0x4;
+ iowrite32be(tmp, hcd->regs + FSL_SOC_USB_CTRL);
+ }
/*
* Enable UTMI phy and program PTS field in UTMI mode before asserting
* controller reset for USB Controller version 2.5
*/
if (pdata->has_fsl_erratum_a007792) {
- clrsetbits_be32(hcd->regs + FSL_SOC_USB_CTRL,
- CONTROL_REGISTER_W1C_MASK, CTRL_UTMI_PHY_EN);
+ tmp = ioread32be(hcd->regs + FSL_SOC_USB_CTRL);
+ tmp &= ~CONTROL_REGISTER_W1C_MASK;
+ tmp |= CTRL_UTMI_PHY_EN;
+ iowrite32be(tmp, hcd->regs + FSL_SOC_USB_CTRL);
+
writel(PORT_PTS_UTMI, hcd->regs + FSL_SOC_USB_PORTSC1);
}

@@ -174,7 +181,7 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
enum fsl_usb2_phy_modes phy_mode,
unsigned int port_offset)
{
- u32 portsc;
+ u32 portsc, tmp;
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
void __iomem *non_ehci = hcd->regs;
struct device *dev = hcd->self.controller;
@@ -192,11 +199,16 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
case FSL_USB2_PHY_ULPI:
if (pdata->have_sysif_regs && pdata->controller_ver) {
/* controller version 1.6 or above */
- clrbits32(non_ehci + FSL_SOC_USB_CTRL,
- CONTROL_REGISTER_W1C_MASK | UTMI_PHY_EN);
- clrsetbits_be32(non_ehci + FSL_SOC_USB_CTRL,
- CONTROL_REGISTER_W1C_MASK,
- ULPI_PHY_CLK_SEL | USB_CTRL_USB_EN);
+ /* turn off UTMI PHY first */
+ tmp = ioread32be(non_ehci + FSL_SOC_USB_CTRL);
+ tmp &= ~(CONTROL_REGISTER_W1C_MASK | UTMI_PHY_EN);
+ iowrite32be(tmp, non_ehci + FSL_SOC_USB_CTRL);
+
+ /* then turn on ULPI and enable USB controller */
+ tmp = ioread32be(non_ehci + FSL_SOC_USB_CTRL);
+ tmp &= ~CONTROL_REGISTER_W1C_MASK;
+ tmp |= ULPI_PHY_CLK_SEL | USB_CTRL_USB_EN;
+ iowrite32be(tmp, non_ehci + FSL_SOC_USB_CTRL);
}
portsc |= PORT_PTS_ULPI;
break;
@@ -210,16 +222,21 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
case FSL_USB2_PHY_UTMI_DUAL:
if (pdata->have_sysif_regs && pdata->controller_ver) {
/* controller version 1.6 or above */
- clrsetbits_be32(non_ehci + FSL_SOC_USB_CTRL,
- CONTROL_REGISTER_W1C_MASK, UTMI_PHY_EN);
+ tmp = ioread32be(non_ehci + FSL_SOC_USB_CTRL);
+ tmp &= ~CONTROL_REGISTER_W1C_MASK;
+ tmp |= UTMI_PHY_EN;
+ iowrite32be(tmp, non_ehci + FSL_SOC_USB_CTRL);
+
mdelay(FSL_UTMI_PHY_DLY); /* Delay for UTMI PHY CLK to
become stable - 10ms*/
}
/* enable UTMI PHY */
- if (pdata->have_sysif_regs)
- clrsetbits_be32(non_ehci + FSL_SOC_USB_CTRL,
- CONTROL_REGISTER_W1C_MASK,
- CTRL_UTMI_PHY_EN);
+ if (pdata->have_sysif_regs) {
+ tmp = ioread32be(non_ehci + FSL_SOC_USB_CTRL);
+ tmp &= ~CONTROL_REGISTER_W1C_MASK;
+ tmp |= CTRL_UTMI_PHY_EN;
+ iowrite32be(tmp, non_ehci + FSL_SOC_USB_CTRL);
+ }
portsc |= PORT_PTS_UTMI;
break;
case FSL_USB2_PHY_NONE:
@@ -241,9 +258,12 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd,

ehci_writel(ehci, portsc, &ehci->regs->port_status[port_offset]);

- if (phy_mode != FSL_USB2_PHY_ULPI && pdata->have_sysif_regs)
- clrsetbits_be32(non_ehci + FSL_SOC_USB_CTRL,
- CONTROL_REGISTER_W1C_MASK, USB_CTRL_USB_EN);
+ if (phy_mode != FSL_USB2_PHY_ULPI && pdata->have_sysif_regs) {
+ tmp = ioread32be(non_ehci + FSL_SOC_USB_CTRL);
+ tmp &= ~CONTROL_REGISTER_W1C_MASK;
+ tmp |= USB_CTRL_USB_EN;
+ iowrite32be(tmp, non_ehci + FSL_SOC_USB_CTRL);
+ }

return 0;
}
--
1.7.1
\
 
 \ /
  Last update: 2019-01-17 10:11    [W:0.084 / U:2.524 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site