lkml.org 
[lkml]   [2019]   [Jan]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/3] mmc: sdhci-omap: drop ->get_ro() implementation
* Thierry Reding <thierry.reding@gmail.com> [190116 13:28]:
> On Tue, Jan 15, 2019 at 05:28:36PM +0100, Thomas Petazzoni wrote:
> > The SDHCI core is know properly checking for the state of a WP GPIO,
>
> "know" -> "now"
>
> > so there is no longer any need for the sdhci-omap code to implement
> > ->get_ro() using mmc_gpio_get_ro().
> >
> > Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
> > ---
> > Note: this patch has only been compiled tested, as I don't have the
> > hardware to test it.
> > ---
> > drivers/mmc/host/sdhci-omap.c | 1 -
> > 1 file changed, 1 deletion(-)
>
> I can't runtime test this myself, but it certainly looks like this would
> do the right thing because it calls the core now call the very same
> function as this used to, so:
>
> Reviewed-by: Thierry Reding <treding@nvidia.com>
>
> Adding Tony and linux-omap for a slightly wider audience and hopefully
> find someone to test this on. For reference, the whole series is here:
>
> https://patchwork.kernel.org/project/linux-mmc/list/?series=66905

Thanks Kishon can you please review and test?

Regards,

Tony

> > diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c
> > index d264391616f9..c2a28930086f 100644
> > --- a/drivers/mmc/host/sdhci-omap.c
> > +++ b/drivers/mmc/host/sdhci-omap.c
> > @@ -987,7 +987,6 @@ static int sdhci_omap_probe(struct platform_device *pdev)
> > goto err_put_sync;
> > }
> >
> > - host->mmc_host_ops.get_ro = mmc_gpio_get_ro;
> > host->mmc_host_ops.start_signal_voltage_switch =
> > sdhci_omap_start_signal_voltage_switch;
> > host->mmc_host_ops.set_ios = sdhci_omap_set_ios;
> > --
> > 2.20.1
> >


\
 
 \ /
  Last update: 2019-01-16 16:47    [W:0.076 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site