lkml.org 
[lkml]   [2019]   [Jan]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 4/4] usb: musb: Add support for MediaTek musb controller
On Wed, Jan 16, 2019 at 05:39:02PM +0800, Min Guo wrote:
> Hi Bin,
>
> On Tue, 2019-01-15 at 14:38 -0600, Bin Liu wrote:
> > Hi Min,
> >
> > very close, thanks.
> > Below I tried to explain a further cleanup in musb_clearb/w() and
> > musb_get/set_toggle() implementation. Please let me know if it is not
> > clear.
> >
> > Basically, we don't need musb_default_clearb/w(), just assign the
> > musb_io function pointers to musb_readb/w().
> >
> > Then the mtk platform musb_clearb/w() calls musb_readb/w() and
> > musb_writeb/w() to handle W1C.
>
> Sorry to bother you again, I encounter a problem when prepare the patch.

no problem at all.

> The define of musb_clearb/w and musb_readb/w are difference as follow,
> and cannot be directly assigned:
> u8/u16 (*readb/w)(const void __iomem *addr, unsigned offset)
> void (*clearb/w)(void __iomem *addr, unsigned int offset))
>
> if modify clearb/w as:
> u8/u16 (*clearb/w)(const void __iomem *addr, unsigned int offset))
> then musb_clear needs writeb/w the const addr.
> Can I delete const in (*readb/w)?

yes, please create a separate patch for it, and for readl() as well,
and stating it is for implementing clearing W1C registers.

Regards,
-Bin.

\
 
 \ /
  Last update: 2019-01-16 15:00    [W:0.076 / U:1.328 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site