lkml.org 
[lkml]   [2019]   [Jan]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] PCI: fix using __initdata memory after free in disable_acs_redir parameter
From
Date
Hi

On 1/15/19 7:32 PM, Logan Gunthorpe wrote:
> The disable_acs_redir parameter stores a pointer to the string passed to
> pci_setup(). However, the string passed to PCI setup is actually a
> temporary copy allocated in static __initdata memory. After init, once
> the memory is freed, it is no longer valid to reference this pointer.
>
> This bug was noticed in v5.0-rc1 after a change in commit c5eb1190074c
> ("PCI / PM: Allow runtime PM without callback functions") caused
> pci_disable_acs_redir() to be called during shutdown which manifested
> as an unable to handle kernel paging request at:
>
> RIP: 0010:pci_enable_acs+0x3f/0x1e0
> Call Trace:
> pci_restore_state.part.44+0x159/0x3c0
> pci_restore_standard_config+0x33/0x40
> pci_pm_runtime_resume+0x2b/0xd0
> ? pci_restore_standard_config+0x40/0x40
> __rpm_callback+0xbc/0x1b0
> rpm_callback+0x1f/0x70
> ? pci_restore_standard_config+0x40/0x40
> rpm_resume+0x4f9/0x710
> ? pci_conf1_read+0xb6/0xf0
> ? pci_conf1_write+0xb2/0xe0
> __pm_runtime_resume+0x47/0x70
> pci_device_shutdown+0x1e/0x60

So this doesn't happen if you revert c5eb1190074c?

I guess this is due dev->state_saved being true set by
pci_pm_runtime_suspend() -> pci_save_state() after my patch and now
pci_pm_runtime_resume() -> pci_restore_standard_config() ->
pci_restore_state() reach the pci_enable_acs(). I think this is possible
to trigger also before my patch if device has the runtime PM callback
defined?

> It was also likely possible to trigger this bug when hotplugging PCI
> devices.
>
> To fix this, instead of storing a pointer, we use kstrdup to copy the
> disable_acs_redir_param to its own buffer which will never be freed.
>
I wasn't able to trigger this but I saw
"PCI: Can't parse disable_acs_redir parameter: " followed by a few lines
of junk during boot when I defined pci=disable_acs_redir=0000:00:xy.z
which disappear after your patch.

Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>

\
 
 \ /
  Last update: 2019-01-16 10:39    [W:0.100 / U:7.588 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site