lkml.org 
[lkml]   [2019]   [Jan]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/2] reset: Add Broadcom STB SW_INIT reset controller driver
Date
Hi Philipp,

This patch series adds support for the Broadcom STB reset controller
using SW_INIT-style registers which have one or more banks of 32
reset lines and separate CLEAR/SET/STATUS registers.

Thanks!

Changes in v2:

- utilize SW_INIT_BIT() in status callback
- removed unused members of private structure
- confirmed maximum reset duration with designers
- renamed binding to brcm,brcmstb-reset.txt


Florian Fainelli (2):
dt-bindings: reset: Add document for Broadcom STB reset controller
reset: Add Broadcom STB SW_INIT reset controller driver

.../bindings/reset/brcm,brcmstb-reset.txt | 27 ++++
drivers/reset/Kconfig | 7 +
drivers/reset/Makefile | 1 +
drivers/reset/reset-brcmstb.c | 130 ++++++++++++++++++
4 files changed, 165 insertions(+)
create mode 100644 Documentation/devicetree/bindings/reset/brcm,brcmstb-reset.txt
create mode 100644 drivers/reset/reset-brcmstb.c

--
2.17.1

\
 
 \ /
  Last update: 2019-01-15 19:44    [W:0.099 / U:0.992 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site