lkml.org 
[lkml]   [2019]   [Jan]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 2/9] platform/chrome: Add new driver for Wilco EC
Hi Nick,

The patch looks pretty good to me, just some minor comments below ...

Missatge de Nick Crews <ncrews@google.com> del dia dl., 14 de gen.
2019 a les 23:05:
>
> From: Duncan Laurie <dlaurie@google.com>
>
> This EC is an incompatible variant of the typical Chrome OS embedded
> controller. It uses the same low-level communication and a similar
> protocol with some significant differences. The EC firmware does
> not support the same mailbox commands so it is not registered as a
> cros_ec device type.
>
> Signed-off-by: Duncan Laurie <dlaurie@google.com>
> Signed-off-by: Nick Crews <ncrews@google.com>
> ---
>
> Changes in v2:
> - Removed COMPILE_TEST from Kconfig because inb()/outb()
> won't work on anything but X86
> - Moved everything to wilco_ec/ subdirectory
> - Moved header file to include/platform_data/
> so could be used by future sub-drivers
> - Tweaked mailbox()
> - Removed duplicate EC_MAILBOX_DATA_SIZE defs
> - Removed some error messages / converted to dbg()
>
> drivers/platform/chrome/Kconfig | 4 +-
> drivers/platform/chrome/Makefile | 2 +
> drivers/platform/chrome/wilco_ec/Kconfig | 24 +++
> drivers/platform/chrome/wilco_ec/Makefile | 4 +
> drivers/platform/chrome/wilco_ec/core.c | 99 +++++++++
> drivers/platform/chrome/wilco_ec/mailbox.c | 237 +++++++++++++++++++++
> include/linux/platform_data/wilco-ec.h | 138 ++++++++++++
> 7 files changed, 507 insertions(+), 1 deletion(-)
> create mode 100644 drivers/platform/chrome/wilco_ec/Kconfig
> create mode 100644 drivers/platform/chrome/wilco_ec/Makefile
> create mode 100644 drivers/platform/chrome/wilco_ec/core.c
> create mode 100644 drivers/platform/chrome/wilco_ec/mailbox.c
> create mode 100644 include/linux/platform_data/wilco-ec.h
>
> diff --git a/drivers/platform/chrome/Kconfig b/drivers/platform/chrome/Kconfig
> index 16b1615958aa..bf889adfd4ef 100644
> --- a/drivers/platform/chrome/Kconfig
> +++ b/drivers/platform/chrome/Kconfig
> @@ -49,6 +49,8 @@ config CHROMEOS_TBMC
> To compile this driver as a module, choose M here: the
> module will be called chromeos_tbmc.
>
> +source "drivers/platform/chrome/wilco_ec/Kconfig"
> +
> config CROS_EC_CTL
> tristate
>
> @@ -86,7 +88,7 @@ config CROS_EC_LPC
>
> config CROS_EC_LPC_MEC
> bool "ChromeOS Embedded Controller LPC Microchip EC (MEC) variant"
> - depends on CROS_EC_LPC
> + depends on CROS_EC_LPC || WILCO_EC
> default n
> help
> If you say Y here, a variant LPC protocol for the Microchip EC
> diff --git a/drivers/platform/chrome/Makefile b/drivers/platform/chrome/Makefile
> index cd591bf872bb..7242ee2b13c5 100644
> --- a/drivers/platform/chrome/Makefile
> +++ b/drivers/platform/chrome/Makefile
> @@ -13,3 +13,5 @@ cros_ec_lpcs-$(CONFIG_CROS_EC_LPC_MEC) += cros_ec_lpc_mec.o
> obj-$(CONFIG_CROS_EC_LPC) += cros_ec_lpcs.o
> obj-$(CONFIG_CROS_EC_PROTO) += cros_ec_proto.o
> obj-$(CONFIG_CROS_KBD_LED_BACKLIGHT) += cros_kbd_led_backlight.o
> +
> +obj-$(CONFIG_WILCO_EC) += wilco_ec/
> diff --git a/drivers/platform/chrome/wilco_ec/Kconfig b/drivers/platform/chrome/wilco_ec/Kconfig
> new file mode 100644
> index 000000000000..f8e6c9e8c5cd
> --- /dev/null
> +++ b/drivers/platform/chrome/wilco_ec/Kconfig
> @@ -0,0 +1,24 @@
> +menuconfig WILCO_EC_PLATFORM
> + bool "Platform support for Wilco Embedded Controller hardware"
> + help
> + Say Y here to get to see options for platform support for
> + various Wilco EC features. This option alone does
> + not add any kernel code.
> +
> + If you say N, all options in this submenu will be skipped and disabled.
> +
> +if WILCO_EC_PLATFORM
> +
> +config WILCO_EC
> + tristate "ChromeOS Wilco Embedded Controller"
> + depends on ACPI && X86
> + select CROS_EC_LPC_MEC
> + help
> + If you say Y here, you get support for talking to the ChromeOS
> + Wilco EC over an eSPI bus. This uses a simple byte-level protocol
> + with a checksum.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called wilco_ec.
> +
> +endif # WILCO_EC_PLATFORM
> diff --git a/drivers/platform/chrome/wilco_ec/Makefile b/drivers/platform/chrome/wilco_ec/Makefile
> new file mode 100644
> index 000000000000..03b32301dc61
> --- /dev/null
> +++ b/drivers/platform/chrome/wilco_ec/Makefile
> @@ -0,0 +1,4 @@
> +# SPDX-License-Identifier: GPL-2.0
> +
> +wilco_ec-objs := core.o mailbox.o
> +obj-$(CONFIG_WILCO_EC) += wilco_ec.o
> diff --git a/drivers/platform/chrome/wilco_ec/core.c b/drivers/platform/chrome/wilco_ec/core.c
> new file mode 100644
> index 000000000000..2d1d8d3f9a94
> --- /dev/null
> +++ b/drivers/platform/chrome/wilco_ec/core.c
> @@ -0,0 +1,99 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Mailbox interface for Wilco Embedded Controller
> + *
> + * Copyright 2018 Google LLC
> + */
> +
> +#include <linux/acpi.h>
> +#include <linux/device.h>
> +#include <linux/ioport.h>
> +#include <linux/module.h>
> +#include <linux/platform_data/wilco-ec.h>
> +#include <linux/platform_device.h>
> +
> +#include "../cros_ec_lpc_mec.h"
> +
> +static struct resource *wilco_get_resource(struct platform_device *pdev,
> + int index)
> +{
> + struct device *dev = &pdev->dev;
> + struct resource *res;
> +
> + res = platform_get_resource(pdev, IORESOURCE_IO, index);
> + if (!res) {
> + dev_dbg(dev, "couldn't find IO resource %d\n", index);
> + return NULL;
return res; ?

> + }
> +
> + if (!devm_request_region(dev, res->start, resource_size(res),
> + dev_name(dev)))
> + return NULL;
> +
> + return res;

return devm_request_region(dev, res->start,
resource_size(res),dev_name(dev))); ?

> +}
> +
> +static int wilco_ec_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct wilco_ec_device *ec;
> + int ret;

This variable is not used, you can remove it.

> +
> + ec = devm_kzalloc(dev, sizeof(*ec), GFP_KERNEL);
> + if (!ec)
> + return -ENOMEM;

nit: I like to see a blank line here

> + platform_set_drvdata(pdev, ec);
> + ec->dev = dev;
> + mutex_init(&ec->mailbox_lock);
> +
> + /* Largest data buffer size requirement is extended data response */
> + ec->data_size = sizeof(struct wilco_ec_response) +
> + EC_MAILBOX_DATA_SIZE_EXTENDED;
> + ec->data_buffer = devm_kzalloc(dev, ec->data_size, GFP_KERNEL);
> + if (!ec->data_buffer)
> + return -ENOMEM;
> +
> + /* Prepare access to IO regions provided by ACPI */
> + ec->io_data = wilco_get_resource(pdev, 0); /* Host Data */
> + ec->io_command = wilco_get_resource(pdev, 1); /* Host Command */
> + ec->io_packet = wilco_get_resource(pdev, 2); /* MEC EMI */
> + if (!ec->io_data || !ec->io_command || !ec->io_packet)
> + return -ENODEV;
> +
> + /* Initialize cros_ec register interface for communication */
> + cros_ec_lpc_mec_init(ec->io_packet->start,
> + ec->io_packet->start + EC_MAILBOX_DATA_SIZE);
> +
> + return 0;
> +}
> +
> +static int wilco_ec_remove(struct platform_device *pdev)
> +{
> + /* Teardown cros_ec interface */
> + cros_ec_lpc_mec_destroy();
> +
> + return 0;
> +}
> +
> +static const struct acpi_device_id wilco_ec_acpi_device_ids[] = {
> + { "GOOG000C", 0 },
> + { }
> +};
> +MODULE_DEVICE_TABLE(acpi, wilco_ec_acpi_device_ids);
> +
> +static struct platform_driver wilco_ec_driver = {
> + .driver = {
> + .name = "wilco_ec",
> + .acpi_match_table = wilco_ec_acpi_device_ids,
> + },
> + .probe = wilco_ec_probe,
> + .remove = wilco_ec_remove,
> +};
> +
> +module_platform_driver(wilco_ec_driver);
> +
> +MODULE_AUTHOR("Nick Crews <ncrews@google.com>");
> +MODULE_AUTHOR("Duncan Laurie <dlaurie@chromium.org>");
> +MODULE_LICENSE("GPL v2");
> +MODULE_DESCRIPTION("ChromeOS Wilco Embedded Controller driver");
> +MODULE_ALIAS("platform:wilco-ec");
> diff --git a/drivers/platform/chrome/wilco_ec/mailbox.c b/drivers/platform/chrome/wilco_ec/mailbox.c
> new file mode 100644
> index 000000000000..221de0d020cf
> --- /dev/null
> +++ b/drivers/platform/chrome/wilco_ec/mailbox.c
> @@ -0,0 +1,237 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Mailbox interface for Wilco Embedded Controller
> + *
> + * Copyright 2018 Google LLC
> + *
> + * The Wilco EC is similar to a typical ChromeOS embedded controller.
> + * It uses the same MEC based low-level communication and a similar
> + * protocol, but with some important differences. The EC firmware does
> + * not support the same mailbox commands so it is not registered as a
> + * cros_ec device type.
> + *
> + * Most messages follow a standard format, but there are some exceptions
> + * and an interface is provided to do direct/raw transactions that do not
> + * make assumptions about byte placement.
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/device.h>
> +#include <linux/io.h>
> +#include <linux/platform_data/wilco-ec.h>
> +#include <linux/platform_device.h>
> +
> +#include "../cros_ec_lpc_mec.h"
> +
> +/* Version of mailbox interface */
> +#define EC_MAILBOX_VERSION 0
> +
> +/* Command to start mailbox transaction */
> +#define EC_MAILBOX_START_COMMAND 0xda
> +
> +/* Version of EC protocol */
> +#define EC_MAILBOX_PROTO_VERSION 3
> +
> +/* Number of header bytes to be counted as data bytes */
> +#define EC_MAILBOX_DATA_EXTRA 2
> +
> +/* Maximum timeout */
> +#define EC_MAILBOX_TIMEOUT HZ
> +
> +/* EC response flags */
> +#define EC_CMDR_DATA BIT(0) /* Data ready for host to read */
> +#define EC_CMDR_PENDING BIT(1) /* Write pending to EC */
> +#define EC_CMDR_BUSY BIT(2) /* EC is busy processing a command */
> +#define EC_CMDR_CMD BIT(3) /* Last host write was a command */
> +
> +/**
> + * wilco_ec_response_timed_out() - Wait for EC response.
> + * @ec: EC device.
> + *
> + * Return: true if EC timed out, false if EC did not time out.
> + */
> +static bool wilco_ec_response_timed_out(struct wilco_ec_device *ec)
> +{
> + unsigned long timeout = jiffies + EC_MAILBOX_TIMEOUT;
> +
> + usleep_range(200, 300);
Is this sleep really needed here? The system will not respond in less
than 200us? What happens if you just remove this line?

> + do {
> + if (!(inb(ec->io_command->start) &
> + (EC_CMDR_PENDING | EC_CMDR_BUSY)))
> + return false;
> + usleep_range(100, 200);
> + } while (time_before(jiffies, timeout));
> +
> + return true;
> +}
> +
> +/**
> + * wilco_ec_checksum() - Compute 8bit checksum over data range.

nit: 8-bit, to be coherent with the documentation with the previous patch

> + * @data: Data to checksum.
> + * @size: Number of bytes to checksum.
> + *
> + * Return: 8bit checksum of provided data.

nit: 8-bit, to be coherent with the documentation with the previous patch

> + */
> +static u8 wilco_ec_checksum(const void *data, size_t size)
> +{
> + u8 *data_bytes = (u8 *)data;
> + u8 checksum = 0;
> + size_t i;
> +
> + for (i = 0; i < size; i++)
> + checksum += data_bytes[i];
> +
> + return checksum;
> +}
> +
> +/**
> + * wilco_ec_prepare() - Prepare the request structure for the EC.
> + * @msg: EC message with request information.
> + * @rq: EC request structure to fill.
> + */
> +static void wilco_ec_prepare(struct wilco_ec_message *msg,
> + struct wilco_ec_request *rq)
> +{
> + memset(rq, 0, sizeof(*rq));
> +
> + /* Handle messages without trimming bytes from the request */
> + if (msg->request_size && msg->flags & WILCO_EC_FLAG_RAW_REQUEST) {
> + rq->reserved_raw = *(u8 *)msg->request_data;
> + msg->request_size--;
> + memmove(msg->request_data, msg->request_data + 1,
> + msg->request_size);
> + }
> +
> + /* Fill in request packet */
> + rq->struct_version = EC_MAILBOX_PROTO_VERSION;
> + rq->mailbox_id = msg->type;
> + rq->mailbox_version = EC_MAILBOX_VERSION;
> + rq->data_size = msg->request_size + EC_MAILBOX_DATA_EXTRA;
> + rq->command = msg->command;
> +
> + /* Checksum header and data */
> + rq->checksum = wilco_ec_checksum(rq, sizeof(*rq));
> + rq->checksum += wilco_ec_checksum(msg->request_data, msg->request_size);
> + rq->checksum = -rq->checksum;
> +}
> +
> +/**
> + * wilco_ec_transfer() - Perform actual data transfer.
> + * @ec: EC device.
> + * @msg: EC message data for request and response.
> + * @rq: Filled in request structure
> + *
> + * Context: ec->mailbox_lock should be held while using this function.
> + * Return: number of bytes received or negative error code on failure.
> + */
> +int wilco_ec_transfer(struct wilco_ec_device *ec, struct wilco_ec_message *msg,
> + struct wilco_ec_request *rq)
> +{
> + struct wilco_ec_response *rs;
> + u8 checksum;
> + u8 flag;
> + size_t size;
> +
> + /* Write request header, then data */
> + cros_ec_lpc_io_bytes_mec(MEC_IO_WRITE, 0, sizeof(*rq), (u8 *)rq);
> + cros_ec_lpc_io_bytes_mec(MEC_IO_WRITE, sizeof(*rq), msg->request_size,
> + msg->request_data);
> +
> + /* Start the command */
> + outb(EC_MAILBOX_START_COMMAND, ec->io_command->start);
> +
> + /* Wait for it to complete */
> + if (wilco_ec_response_timed_out(ec)) {
> + dev_dbg(ec->dev, "response timed out\n");
> + return -ETIMEDOUT;
> + }
> +
> + /* For some commands (eg shutdown) the EC will not respond, that's OK */
> + if (msg->flags & WILCO_EC_FLAG_NO_RESPONSE) {
> + dev_dbg(ec->dev, "EC does not respond to this command\n");
> + return 0;
> + }
> +
> + /* Check result */
> + flag = inb(ec->io_data->start);
> + if (flag) {
> + dev_dbg(ec->dev, "bad response: 0x%02x\n", flag);
> + return -EIO;
> + }
> +
> + if (msg->flags & WILCO_EC_FLAG_EXTENDED_DATA)
> + size = EC_MAILBOX_DATA_SIZE_EXTENDED;
> + else
> + size = EC_MAILBOX_DATA_SIZE;
> +
> + /* Read back response */
> + rs = ec->data_buffer;
> + checksum = cros_ec_lpc_io_bytes_mec(MEC_IO_READ, 0,
> + sizeof(*rs) + size, (u8 *)rs);
> + if (checksum) {
> + dev_dbg(ec->dev, "bad packet checksum 0x%02x\n", rs->checksum);
> + return -EBADMSG;
> + }
> +
> + /* Check that the EC reported success */
> + msg->result = rs->result;
> + if (msg->result) {
> + dev_dbg(ec->dev, "bad response: 0x%02x\n", msg->result);
> + return -EBADMSG;
> + }
> +
> + /* Check the returned data size, skipping the header */
> + if (rs->data_size != size) {
> + dev_dbg(ec->dev, "unexpected packet size (%u != %zu)",
> + rs->data_size, size);
> + return -EMSGSIZE;
> + }
> +
> + /* Skip 1 response data byte unless specified */
> + size = (msg->flags & WILCO_EC_FLAG_RAW_RESPONSE) ? 0 : 1;
> + if ((ssize_t) rs->data_size - size < msg->response_size) {
> + dev_dbg(ec->dev, "response data too short (%zd < %zu)",
> + (ssize_t) rs->data_size - size, msg->response_size);
> + return -EMSGSIZE;
> + }
> +
> + /* Ignore response data bytes as requested */
> + memcpy(msg->response_data, rs->data + size, msg->response_size);
> +
> + /* Return actual amount of data received */
> + return msg->response_size;
> +}
> +
> +/**
> + * wilco_ec_mailbox() - Send EC request and receive EC response.
> + * @ec: EC device.
> + * @msg: EC message data for request and response.
> + *
> + * On entry msg->type, msg->flags, msg->command, msg->request_size,
> + * msg->response_size, and msg->request_data should all be filled in.
> + *
> + * On exit msg->result and msg->response_data will be filled.
> + *
> + * Return: number of bytes received or negative error code on failure.
> + */
> +int wilco_ec_mailbox(struct wilco_ec_device *ec, struct wilco_ec_message *msg)
> +{
> + struct wilco_ec_request *rq;
> + int ret;
> +
> + dev_dbg(ec->dev, "cmd=%02x type=%04x flags=%02x rslen=%zu rqlen=%zu\n",
> + msg->command, msg->type, msg->flags, msg->response_size,
> + msg->request_size);
> +
> + /* Prepare request packet */
> + rq = ec->data_buffer;
> + wilco_ec_prepare(msg, rq);
> +
> + mutex_lock(&ec->mailbox_lock);
> + ret = wilco_ec_transfer(ec, msg, rq);
> + mutex_unlock(&ec->mailbox_lock);
> +
> + return ret;
> +
> +}
> +EXPORT_SYMBOL_GPL(wilco_ec_mailbox);
> diff --git a/include/linux/platform_data/wilco-ec.h b/include/linux/platform_data/wilco-ec.h
> new file mode 100644
> index 000000000000..5477b8802f81
> --- /dev/null
> +++ b/include/linux/platform_data/wilco-ec.h
> @@ -0,0 +1,138 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * ChromeOS Wilco Embedded Controller
> + *
> + * Copyright 2018 Google LLC
> + */
> +
> +#ifndef WILCO_EC_H
> +#define WILCO_EC_H
> +
> +#include <linux/device.h>
> +#include <linux/kernel.h>
> +
> +#define WILCO_EC_FLAG_NO_RESPONSE BIT(0) /* EC does not respond */
> +#define WILCO_EC_FLAG_EXTENDED_DATA BIT(1) /* EC returns 256 data bytes */
> +#define WILCO_EC_FLAG_RAW_REQUEST BIT(2) /* Do not trim request data */
> +#define WILCO_EC_FLAG_RAW_RESPONSE BIT(3) /* Do not trim response data */
> +#define WILCO_EC_FLAG_RAW (WILCO_EC_FLAG_RAW_REQUEST | \
> + WILCO_EC_FLAG_RAW_RESPONSE)
> +
> +/* Normal commands have a maximum 32 bytes of data */
> +#define EC_MAILBOX_DATA_SIZE 32
> +
> +/* Extended commands have 256 bytes of response data */
> +#define EC_MAILBOX_DATA_SIZE_EXTENDED 256
> +
> +/**
> + * struct wilco_ec_device - Wilco Embedded Controller handle.
> + * @dev: Device handle.
> + * @mailbox_lock: Mutex to ensure one mailbox command at a time.
> + * @io_command: I/O port for mailbox command. Provided by ACPI.
> + * @io_data: I/O port for mailbox data. Provided by ACPI.
> + * @io_packet: I/O port for mailbox packet data. Provided by ACPI.
> + * @data_buffer: Buffer used for EC communication. The same buffer
> + * is used to hold the request and the response.
> + * @data_size: Size of the data buffer used for EC communication.
> + */
> +struct wilco_ec_device {
> + struct device *dev;
> + struct mutex mailbox_lock;
> + struct resource *io_command;
> + struct resource *io_data;
> + struct resource *io_packet;
> + void *data_buffer;
> + size_t data_size;
> +};
> +
> +/**
> + * enum wilco_ec_msg_type - Message type to select a set of command codes.
> + * @WILCO_EC_MSG_LEGACY: Legacy EC messages for standard EC behavior.
> + * @WILCO_EC_MSG_PROPERTY: Get/Set/Sync EC controlled NVRAM property.
> + * @WILCO_EC_MSG_TELEMETRY: Telemetry data provided by the EC.
> + */
> +enum wilco_ec_msg_type {
> + WILCO_EC_MSG_LEGACY = 0x00f0,
> + WILCO_EC_MSG_PROPERTY = 0x00f2,
> + WILCO_EC_MSG_TELEMETRY = 0x00f5,
> +};
> +
> +/**
> + * struct wilco_ec_message - Request and response message.
> + * @type: Mailbox message type.
> + * @flags: Message flags.
> + * @command: Mailbox command code.
> + * @result: Result code from the EC. Non-zero indicates an error.
> + * @request_size: Number of bytes to send to the EC.
> + * @request_data: Buffer containing the request data.
> + * @response_size: Number of bytes expected from the EC.
> + * This is 32 by default and 256 if the flag
> + * is set for %WILCO_EC_FLAG_EXTENDED_DATA
> + * @response_data: Buffer containing the response data, should be
> + * response_size bytes and allocated by caller.
> + */
> +struct wilco_ec_message {
> + enum wilco_ec_msg_type type;
> + u8 flags;
> + u8 command;
> + u8 result;
> + size_t request_size;
> + void *request_data;
> + size_t response_size;
> + void *response_data;
> +};
> +
> +/**
> + * struct wilco_ec_request - Mailbox request message format.
> + * @struct_version: Should be %EC_MAILBOX_PROTO_VERSION
> + * @checksum: Sum of all bytes must be 0.
> + * @mailbox_id: Mailbox identifier, specifies the command set.
> + * @mailbox_version: Mailbox interface version %EC_MAILBOX_VERSION
> + * @reserved: Set to zero.
> + * @data_size: Length of request, data + last 2 bytes of the header.
> + * @command: Mailbox command code, unique for each mailbox_id set.
> + * @reserved_raw: Set to zero for most commands, but is used by
> + * some command types and for raw commands.
> + */
> +struct wilco_ec_request {
> + u8 struct_version;
> + u8 checksum;
> + u16 mailbox_id;
> + u8 mailbox_version;
> + u8 reserved;
> + u16 data_size;
> + u8 command;
> + u8 reserved_raw;
> +} __packed;
> +
> +/**
> + * struct wilco_ec_response - Mailbox response message format.
> + * @struct_version: Should be %EC_MAILBOX_PROTO_VERSION
> + * @checksum: Sum of all bytes must be 0.
> + * @result: Result code from the EC. Non-zero indicates an error.
> + * @data_size: Length of the response data buffer.
> + * @reserved: Set to zero.
> + * @mbox0: EC returned data at offset 0 is unused (always 0) so this byte
> + * is treated as part of the header instead of the data.
> + * @data: Response data buffer. Max size is %EC_MAILBOX_DATA_SIZE_EXTENDED.
> + */
> +struct wilco_ec_response {
> + u8 struct_version;
> + u8 checksum;
> + u16 result;
> + u16 data_size;
> + u8 reserved[2];
> + u8 mbox0;
> + u8 data[0];
> +} __packed;
> +
> +/**
> + * wilco_ec_mailbox() - Send request to the EC and receive the response.
> + * @ec: Wilco EC device.
> + * @msg: Wilco EC message.
> + *
> + * Return: Number of bytes received or negative error code on failure.
> + */
> +int wilco_ec_mailbox(struct wilco_ec_device *ec, struct wilco_ec_message *msg);
> +
> +#endif /* WILCO_EC_H */
> --
> 2.20.1.97.g81188d93c3-goog
>

Thanks,
Enric

\
 
 \ /
  Last update: 2019-01-15 19:10    [W:0.142 / U:1.832 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site