lkml.org 
[lkml]   [2019]   [Jan]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 00/15] powerpc/32s: Use BATs/LTLBs for STRICT_KERNEL_RWX
From
Date


Le 15/01/2019 à 01:33, Jonathan Neuschäfer a écrit :
> On Mon, Jan 14, 2019 at 07:23:07PM +0100, Christophe Leroy wrote:
>>
>>
>> Le 13/01/2019 à 22:02, Jonathan Neuschäfer a écrit :
>>> On Sun, Jan 13, 2019 at 08:43:07PM +0100, Christophe Leroy wrote:
>>>> Le 13/01/2019 à 19:16, Jonathan Neuschäfer a écrit :
>>>>> I just tested the whole series on my Wii (I didn't test any intermediate
>>>>> steps). Without CONFIG_STRICT_KERNEL_RWX, it seems to work fine, but
>>>>> with it, I get the following error while booting:
> [...]
>> I can't see anything special in your setup, and this failure looks rather
>> unexpected because I can't see anything done that early when
>> CONFIG_STRICT_KERNEL_RWX is selected.
>>
>> Does CONFIG_STRICT_KERNEL_RWX works properly without my serie ?
>
> I hadn't tried this before, but yes, without this series (on v5.0-rc2),
> a kernel with CONFIG_STRICT_KERNEL_RWX boots.
>
> I've checked it patch-by-patch now (with STRICT_KERNEL_RWX):
>
> - patches 1 and 2 build and boot fine
> - patches 3 to 6 build, but fail to boot with this error:

The bug is in patch 2, mmu_mapin_ram() should return base instead of
returning 0 when __map_without_bats is set.

>
> top of MEM2 @ 13F00000
>
> zImage starting: loaded at 0x00e00000 (sp: 0x01588fa0)
> Allocating 0x14e92c8 bytes for kernel...
> Decompressing (0x00000000 <- 0x00e11000:0x01586ba7)...
> Done! Decompressed 0xdc01f4 bytes
>
> Linux/PowerPC load: root=/dev/mmcblk0p2 rootwait console=usbgecko1
> Finalizing device tree... flat tree at 0x15897a0
> [ 0.000000] printk: bootconsole [udbg0] enabled
> [ 0.000000] Total memory = 319MB; using 1024kB for hash table (at (ptrval))
> [ 0.000000] RAM mapped without BATs
> [ 0.000000] RAM mapped without BATs
> [ 0.000000] ------------[ cut here ]------------
> [ 0.000000] kernel BUG at arch/powerpc/mm/pgtable_32.c:223!
> [ 0.000000] Oops: Exception in kernel mode, sig: 5 [#1]
> [ 0.000000] BE PREEMPT
> [ 0.000000] Modules linked in:
> [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.0.0-rc1-wii-00024-g596f9fe23c13 #1337
> [ 0.000000] NIP: c0017c4c LR: c0a836a0 CTR: c001edc4
> [ 0.000000] REGS: c0d9deb0 TRAP: 0700 Not tainted (5.0.0-rc1-wii-00024-g596f9fe23c13)
> [ 0.000000] MSR: 00020030 <IR,DR> CR: 42000888 XER: 20000000
> [ 0.000000]
> [ 0.000000] GPR00: c0a836a0 c0d9df60 c0d2a4a0 c0d29c00 00000000 c16ff000 c0d9de28 c0dc0000
> [ 0.000000] GPR08: c0d9c000 00000001 00000001 00000000 28000824 00000000 00000000 00000000
> [ 0.000000] GPR16: 00000000 00000000 00000020 00000000 c0860000 c0da0000 c0000000 c0a7d000
> [ 0.000000] GPR24: c0acd55c c0d487c8 13f00000 c0d29000 00000c00 00000311 c0000000 c0d487c8
> [ 0.000000] NIP [c0017c4c] map_kernel_page+0x78/0xf0
> [ 0.000000] LR [c0a836a0] mapin_ram+0xe0/0x14c
> [ 0.000000] Call Trace:
> [ 0.000000] [c0d9df60] [c0a83f54] mmu_mapin_ram+0x54/0x1a4 (unreliable)
> [ 0.000000] [c0d9df90] [c0a836a0] mapin_ram+0xe0/0x14c
> [ 0.000000] [c0d9dfd0] [c0a83578] MMU_init+0x158/0x1a0
> [ 0.000000] [c0d9dff0] [c0003418] start_here+0x40/0x78
> [ 0.000000] Instruction dump:
> [ 0.000000] 55290026 57c5b53a 7ca54a14 3d204000 7f854800 3ca5c000 419e0088 81250000
> [ 0.000000] 552afffe 552907fe 7d4a4b79 4082004c <0f0a0000> 54840026 7c84eb78 9081000c
> [ 0.000000] random: get_random_bytes called from print_oops_end_marker+0x34/0x6c with crng_init=0
> [ 0.000000] ---[ end trace 0000000000000000 ]---
> [ 0.000000]
> [ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task!
> [ 0.000000] Rebooting in 180 seconds..
>
> - patches 7 to 11 fail to build with this error (really a warning, but
> arch/powerpc doesn't allow warnings by default):
>
> CC arch/powerpc/mm/ppc_mmu_32.o
> ../arch/powerpc/mm/ppc_mmu_32.c:133:13: error: ‘clearibat’ defined but not used [-Werror=unused-function]
> static void clearibat(int index)
> ^~~~~~~~~
> ../arch/powerpc/mm/ppc_mmu_32.c:115:13: error: ‘setibat’ defined but not used [-Werror=unused-function]
> static void setibat(int index, unsigned long virt, phys_addr_t phys,
> ^~~~~~~
> cc1: all warnings being treated as errors

Argh ! I have to squash the patch bringing the new functions with the
one using them (patch 12). The result is a big messy patch which is more
difficult to review but that's life.

>
> - patches 12 to 15 build but fail to boot with this error:

Thats the one we need to really understand.

Do you have modules ? If so, can you try without ?

>
> top of MEM2 @ 13F00000
>
> zImage starting: loaded at 0x01000000 (sp: 0x0178afa0)
> Allocating 0x166b2c8 bytes for kernel...
> Decompressing (0x00000000 <- 0x01011000:0x017880ce)...
> Done! Decompressed 0xf421f4 bytes
>
> Linux/PowerPC load: root=/dev/mmcblk0p2 rootwait console=usbgecko1
> Finalizing device tree... flat tree at 0x178b7a0
> [ 0.000000] printk: bootconsole [udbg0] enabled
> [ 0.000000] Kernel panic - not syncing: ERROR: Failed to allocate 0x00100000 bytes below 0x00000000.
> [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.0.0-rc1-wii-00033-gc263f8162122 #1337
> [ 0.000000] Call Trace:
> [ 0.000000] [c0f1ff30] [c00280f0] panic+0x144/0x324 (unreliable)
> [ 0.000000] [c0f1ff90] [c0c18a34] memblock_alloc_base+0x34/0x44
> [ 0.000000] [c0f1ffa0] [c0c071e0] MMU_init_hw+0xcc/0x300
> [ 0.000000] [c0f1ffd0] [c0c06554] MMU_init+0x12c/0x198
> [ 0.000000] [c0f1fff0] [c0003418] start_here+0x40/0x78
> [ 0.000000] Rebooting in 180 seconds..
>
>
> I'll investigate some more tomorrow.

Thanks a lot for your help.

>
> Jonathan
>

Christophe

\
 
 \ /
  Last update: 2019-01-15 07:51    [W:0.081 / U:153.756 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site