lkml.org 
[lkml]   [2019]   [Jan]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next 1/3] net: dsa: Split platform data to header file
Date
Instead of having net/dsa.h contain both the internal switch tree/driver
structures, split the relevant platform_data parts into
include/linux/platform_data/dsa.h and make that header be included by
net/dsa.h in order not to break any setup. A subsequent set of patches
will update code including net/dsa.h to include only the platform_data
header.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
MAINTAINERS | 1 +
include/linux/platform_data/dsa.h | 68 +++++++++++++++++++++++++++++++
include/net/dsa.h | 61 +--------------------------
3 files changed, 70 insertions(+), 60 deletions(-)
create mode 100644 include/linux/platform_data/dsa.h

diff --git a/MAINTAINERS b/MAINTAINERS
index 4d04cebb4a71..a592b9992b46 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -10576,6 +10576,7 @@ F: Documentation/devicetree/bindings/net/dsa/
F: net/dsa/
F: include/net/dsa.h
F: include/linux/dsa/
+F: include/linux/platform_data/dsa.h
F: drivers/net/dsa/

NETWORKING [GENERAL]
diff --git a/include/linux/platform_data/dsa.h b/include/linux/platform_data/dsa.h
new file mode 100644
index 000000000000..d4d9bf2060a6
--- /dev/null
+++ b/include/linux/platform_data/dsa.h
@@ -0,0 +1,68 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __DSA_PDATA_H
+#define __DSA_PDATA_H
+
+struct device;
+struct net_device;
+
+#define DSA_MAX_SWITCHES 4
+#define DSA_MAX_PORTS 12
+#define DSA_RTABLE_NONE -1
+
+struct dsa_chip_data {
+ /*
+ * How to access the switch configuration registers.
+ */
+ struct device *host_dev;
+ int sw_addr;
+
+ /*
+ * Reference to network devices
+ */
+ struct device *netdev[DSA_MAX_PORTS];
+
+ /* set to size of eeprom if supported by the switch */
+ int eeprom_len;
+
+ /* Device tree node pointer for this specific switch chip
+ * used during switch setup in case additional properties
+ * and resources needs to be used
+ */
+ struct device_node *of_node;
+
+ /*
+ * The names of the switch's ports. Use "cpu" to
+ * designate the switch port that the cpu is connected to,
+ * "dsa" to indicate that this port is a DSA link to
+ * another switch, NULL to indicate the port is unused,
+ * or any other string to indicate this is a physical port.
+ */
+ char *port_names[DSA_MAX_PORTS];
+ struct device_node *port_dn[DSA_MAX_PORTS];
+
+ /*
+ * An array of which element [a] indicates which port on this
+ * switch should be used to send packets to that are destined
+ * for switch a. Can be NULL if there is only one switch chip.
+ */
+ s8 rtable[DSA_MAX_SWITCHES];
+};
+
+struct dsa_platform_data {
+ /*
+ * Reference to a Linux network interface that connects
+ * to the root switch chip of the tree.
+ */
+ struct device *netdev;
+ struct net_device *of_netdev;
+
+ /*
+ * Info structs describing each of the switch chips
+ * connected via this network interface.
+ */
+ int nr_chips;
+ struct dsa_chip_data *chip;
+};
+
+
+#endif /* __DSA_PDATA_H */
diff --git a/include/net/dsa.h b/include/net/dsa.h
index b3eefe8e18fd..6178b648d08a 100644
--- a/include/net/dsa.h
+++ b/include/net/dsa.h
@@ -21,6 +21,7 @@
#include <linux/ethtool.h>
#include <linux/net_tstamp.h>
#include <linux/phy.h>
+#include <linux/platform_data/dsa.h>
#include <net/devlink.h>
#include <net/switchdev.h>

@@ -44,66 +45,6 @@ enum dsa_tag_protocol {
DSA_TAG_LAST, /* MUST BE LAST */
};

-#define DSA_MAX_SWITCHES 4
-#define DSA_MAX_PORTS 12
-
-#define DSA_RTABLE_NONE -1
-
-struct dsa_chip_data {
- /*
- * How to access the switch configuration registers.
- */
- struct device *host_dev;
- int sw_addr;
-
- /*
- * Reference to network devices
- */
- struct device *netdev[DSA_MAX_PORTS];
-
- /* set to size of eeprom if supported by the switch */
- int eeprom_len;
-
- /* Device tree node pointer for this specific switch chip
- * used during switch setup in case additional properties
- * and resources needs to be used
- */
- struct device_node *of_node;
-
- /*
- * The names of the switch's ports. Use "cpu" to
- * designate the switch port that the cpu is connected to,
- * "dsa" to indicate that this port is a DSA link to
- * another switch, NULL to indicate the port is unused,
- * or any other string to indicate this is a physical port.
- */
- char *port_names[DSA_MAX_PORTS];
- struct device_node *port_dn[DSA_MAX_PORTS];
-
- /*
- * An array of which element [a] indicates which port on this
- * switch should be used to send packets to that are destined
- * for switch a. Can be NULL if there is only one switch chip.
- */
- s8 rtable[DSA_MAX_SWITCHES];
-};
-
-struct dsa_platform_data {
- /*
- * Reference to a Linux network interface that connects
- * to the root switch chip of the tree.
- */
- struct device *netdev;
- struct net_device *of_netdev;
-
- /*
- * Info structs describing each of the switch chips
- * connected via this network interface.
- */
- int nr_chips;
- struct dsa_chip_data *chip;
-};
-
struct packet_type;
struct dsa_switch;

--
2.17.1
\
 
 \ /
  Last update: 2019-01-16 00:07    [W:0.153 / U:0.048 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site