lkml.org 
[lkml]   [2019]   [Jan]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 1/7] dt-bindings: soc: qcom: Add AOSS QMP binding
From
Date
Quoting Bjorn Andersson (2019-01-06 00:09:09)
> Add binding for the QMP based side-channel communication mechanism to
> the AOSS, which is used to control resources not exposed through the
> RPMh interface.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Reviewed-by: Stephen Boyd <swboyd@chromium.org>

one nit below.

> diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt
> new file mode 100644
> index 000000000000..9b0d9785efe0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt
> @@ -0,0 +1,57 @@
> += EXAMPLE
> +
> +The following example represents the AOSS side-channel message RAM and the
> +mechanism exposing the power-domains, as found in SDM845.
> +
> + aoss_qmp: qmp@c300000 {
> + compatible = "qcom,sdm845-aoss-qmp";
> + reg = <0x0c300000 0x100000>;
> + interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
> + mboxes = <&apss_shared 0>;
> +
> + #power-domain-cells = <1>;

This is weirdly tabbed out.

\
 
 \ /
  Last update: 2019-01-14 23:31    [W:0.159 / U:27.652 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site