lkml.org 
[lkml]   [2019]   [Jan]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 2/2] dt-bindings: iio: chemical: Add bindings for bme680
From
Date

On 1/12/19 1:28 PM, Jonathan Cameron wrote:
> On Fri, 11 Jan 2019 15:53:59 -0500
> Sebastien Bourdelin <sebastien.bourdelin@gmail.com> wrote:
>
>> BME680 is a pressure/temperature/humidity/voc sensor.
>>
>> Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@gmail.com>
> Hmm. We could add the VDD and VDIO regulators perhaps.
> Driver assumes they are on currently but we'll get a board where control
> is needed sooner or later. I'm not that fussed about this though.

If that's fine with you, i prefer to leave it as it is right now as i
don't feel

confident enough to correctly explain it in the Documentation.

But if you have more input, you are more then welcome!

> Jonathan
>
>> ---
>> .../devicetree/bindings/iio/chemical/bme680.txt | 11 +++++++++++
>> 1 file changed, 11 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/iio/chemical/bme680.txt
>>
>> diff --git a/Documentation/devicetree/bindings/iio/chemical/bme680.txt b/Documentation/devicetree/bindings/iio/chemical/bme680.txt
>> new file mode 100644
>> index 000000000000..885a1b918340
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/iio/chemical/bme680.txt
>> @@ -0,0 +1,11 @@
>> +Bosch Sensortec BME680 pressure/temperature/humidity/voc sensors
>> +
>> +Required properties:
>> +- compatible: must be "bosch,bme680"
>> +
>> +Example:
>> +
>> +bme680@77 {
>> + compatible = "bosch,bme680";
>> + reg = <0x77>;
>> +};

\
 
 \ /
  Last update: 2019-01-14 21:19    [W:0.060 / U:6.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site