lkml.org 
[lkml]   [2019]   [Jan]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectApplied "regulator: fixed/gpio: Update device tree bindings" to the regulator tree
Date
The patch

regulator: fixed/gpio: Update device tree bindings

has been applied to the regulator tree at

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

From 0d362f88573d67e661a45932e4eb1a2ab42ffae2 Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Mon, 7 Jan 2019 17:27:44 +0100
Subject: [PATCH] regulator: fixed/gpio: Update device tree bindings

Deprecate the open drain binding for fixed regulator and indicate
that we prefer this to be passed in the GPIO phandle flags.

Clarify that the line inversion semantics for fixed and GPIO
regulators completely overrides the active low flags in the
phandle flags.

Unfortunately this can not be changed to prefer that we pass
the flags in the phandle: the bindings have been specified and
deployed such that the presence/absence of this flag and only
that controls the line inversion semantics. The crucial semantic
is that the absence of the flag means the core will assume
the line is active low, which in GPIO terms is an exception,
as GPIO lines are normally assumed to be active high.

This special device tree semantic cannot be changed without
introducing a whole new compatible string for the fixed and
GPIO regulators, so we just contain the situation.

Cc: devicetree@vger.kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
.../bindings/regulator/fixed-regulator.txt | 13 +++++++++++--
.../bindings/regulator/gpio-regulator.txt | 4 ++++
2 files changed, 15 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/regulator/fixed-regulator.txt b/Documentation/devicetree/bindings/regulator/fixed-regulator.txt
index 0c2a6c8a1536..a7a1cd0dfa6e 100644
--- a/Documentation/devicetree/bindings/regulator/fixed-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/fixed-regulator.txt
@@ -8,10 +8,19 @@ Optional properties:
- gpio: gpio to use for enable control
- startup-delay-us: startup time in microseconds
- enable-active-high: Polarity of GPIO is Active high
-If this property is missing, the default assumed is Active low.
+ If this property is missing, the default assumed is Active low.
+ If the phandle flags to the GPIO handle also flag the line as active
+ low or high, that will be ignored for fixed regulators and the
+ presence or absence of this flag solely controls the inversion
+ semantics.
+-vin-supply: Input supply name.
+
+Deprecated properties:
- gpio-open-drain: GPIO is open drain type.
If this property is missing then default assumption is false.
--vin-supply: Input supply name.
+ Do not use this property in new device trees: instead use the
+ phandle flag to indicate to the GPIO provider that the line
+ should be handled as open drain.

Any property defined as part of the core regulator
binding, defined in regulator.txt, can also be used.
diff --git a/Documentation/devicetree/bindings/regulator/gpio-regulator.txt b/Documentation/devicetree/bindings/regulator/gpio-regulator.txt
index 1f496159e2bb..8fef3e5358a2 100644
--- a/Documentation/devicetree/bindings/regulator/gpio-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/gpio-regulator.txt
@@ -14,6 +14,10 @@ Optional properties:
defualt is LOW if nothing is specified.
- startup-delay-us : Startup time in microseconds.
- enable-active-high : Polarity of GPIO is active high (default is low).
+ If the phandle flags to the GPIO handle also flag the line as
+ active low or high, that will be ignored for fixed regulators
+ and the presence or absence of this flag solely controls the
+ inversion semantics.
- regulator-type : Specifies what is being regulated, must be either
"voltage" or "current", defaults to voltage.

--
2.20.1
\
 
 \ /
  Last update: 2019-01-14 13:09    [W:0.029 / U:10.808 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site