lkml.org 
[lkml]   [2019]   [Jan]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] dt-bindings: serial: Convert snps,dw-apb-uart to json-schema
On Thu, Jan 10, 2019 at 04:20:16PM -0600, Rob Herring wrote:
> Convert the snps,dw-apb-uart binding to DT schema using json-schema.
>
> The Rockchip and Broadcom compatible strings were not documented,
> so add them here.

I believe the documentation of the Renesas compatible strings is also new
in this file. Perhaps it would be worth mentioning that too.

In any case

Reviewed-by: Simon Horman <horms+renesas@verge.net.au>

> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: linux-serial@vger.kernel.org
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---
> .../bindings/serial/snps-dw-apb-uart.txt | 76 ----------
> .../bindings/serial/snps-dw-apb-uart.yaml | 140 ++++++++++++++++++
> 2 files changed, 140 insertions(+), 76 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt
> create mode 100644 Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml
>
> diff --git a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt
> deleted file mode 100644
> index 12bbe9f22560..000000000000
> --- a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt
> +++ /dev/null
> @@ -1,76 +0,0 @@
> -* Synopsys DesignWare ABP UART
> -
> -Required properties:
> -- compatible : "snps,dw-apb-uart"
> -- reg : offset and length of the register set for the device.
> -- interrupts : should contain uart interrupt.
> -
> -Clock handling:
> -The clock rate of the input clock needs to be supplied by one of
> -- clock-frequency : the input clock frequency for the UART.
> -- clocks : phandle to the input clock
> -
> -The supplying peripheral clock can also be handled, needing a second property
> -- clock-names: tuple listing input clock names.
> - Required elements: "baudclk", "apb_pclk"
> -
> -Optional properties:
> -- snps,uart-16550-compatible : reflects the value of UART_16550_COMPATIBLE
> - configuration parameter. Define this if your UART does not implement the busy
> - functionality.
> -- resets : phandle to the parent reset controller.
> -- reg-shift : quantity to shift the register offsets by. If this property is
> - not present then the register offsets are not shifted.
> -- reg-io-width : the size (in bytes) of the IO accesses that should be
> - performed on the device. If this property is not present then single byte
> - accesses are used.
> -- dcd-override : Override the DCD modem status signal. This signal will always
> - be reported as active instead of being obtained from the modem status
> - register. Define this if your serial port does not use this pin.
> -- dsr-override : Override the DTS modem status signal. This signal will always
> - be reported as active instead of being obtained from the modem status
> - register. Define this if your serial port does not use this pin.
> -- cts-override : Override the CTS modem status signal. This signal will always
> - be reported as active instead of being obtained from the modem status
> - register. Define this if your serial port does not use this pin.
> -- ri-override : Override the RI modem status signal. This signal will always be
> - reported as inactive instead of being obtained from the modem status register.
> - Define this if your serial port does not use this pin.
> -
> -Example:
> -
> - uart@80230000 {
> - compatible = "snps,dw-apb-uart";
> - reg = <0x80230000 0x100>;
> - clock-frequency = <3686400>;
> - interrupts = <10>;
> - reg-shift = <2>;
> - reg-io-width = <4>;
> - dcd-override;
> - dsr-override;
> - cts-override;
> - ri-override;
> - };
> -
> -Example with one clock:
> -
> - uart@80230000 {
> - compatible = "snps,dw-apb-uart";
> - reg = <0x80230000 0x100>;
> - clocks = <&baudclk>;
> - interrupts = <10>;
> - reg-shift = <2>;
> - reg-io-width = <4>;
> - };
> -
> -Example with two clocks:
> -
> - uart@80230000 {
> - compatible = "snps,dw-apb-uart";
> - reg = <0x80230000 0x100>;
> - clocks = <&baudclk>, <&apb_pclk>;
> - clock-names = "baudclk", "apb_pclk";
> - interrupts = <10>;
> - reg-shift = <2>;
> - reg-io-width = <4>;
> - };
> diff --git a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml
> new file mode 100644
> index 000000000000..b42002542690
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml
> @@ -0,0 +1,140 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/serial/snps-dw-apb-uart.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Synopsys DesignWare ABP UART
> +
> +maintainers:
> + - Rob Herring <robh@kernel.org>
> +
> +allOf:
> + - $ref: /schemas/serial.yaml#
> +
> +properties:
> + compatible:
> + oneOf:
> + - items:
> + - enum:
> + - renesas,r9a06g032-uart
> + - renesas,r9a06g033-uart
> + - const: renesas,rzn1-uart
> + - items:
> + - enum:
> + - rockchip,px30-uart
> + - rockchip,rk3036-uart
> + - rockchip,rk3066-uart
> + - rockchip,rk3188-uart
> + - rockchip,rk3288-uart
> + - rockchip,rk3328-uart
> + - rockchip,rk3368-uart
> + - rockchip,rk3399-uart
> + - rockchip,rv1108-uart
> + - const: snps,dw-apb-uart
> + - items:
> + - enum:
> + - brcm,bcm11351-dw-apb-uart
> + - brcm,bcm21664-dw-apb-uart
> + - const: snps,dw-apb-uart
> + - const: snps,dw-apb-uart
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + clock-frequency: true
> +
> + clocks:
> + minItems: 1
> + maxItems: 2
> +
> + clock-names:
> + items:
> + - const: baudclk
> + - const: apb_pclk
> +
> + snps,uart-16550-compatible:
> + description: reflects the value of UART_16550_COMPATIBLE configuration
> + parameter. Define this if your UART does not implement the busy functionality.
> + type: boolean
> +
> + resets:
> + maxItems: 1
> +
> + reg-shift: true
> +
> + reg-io-width: true
> +
> + dcd-override:
> + description: Override the DCD modem status signal. This signal will
> + always be reported as active instead of being obtained from the modem
> + status register. Define this if your serial port does not use this
> + pin.
> + type: boolean
> +
> + dsr-override:
> + description: Override the DTS modem status signal. This signal will
> + always be reported as active instead of being obtained from the modem
> + status register. Define this if your serial port does not use this
> + pin.
> + type: boolean
> +
> + cts-override:
> + description: Override the CTS modem status signal. This signal will
> + always be reported as active instead of being obtained from the modem
> + status register. Define this if your serial port does not use this
> + pin.
> + type: boolean
> +
> + ri-override:
> + description: Override the RI modem status signal. This signal will always
> + be reported as inactive instead of being obtained from the modem status
> + register. Define this if your serial port does not use this pin.
> + type: boolean
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> +
> +examples:
> + - |
> + serial@80230000 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x80230000 0x100>;
> + clock-frequency = <3686400>;
> + interrupts = <10>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + dcd-override;
> + dsr-override;
> + cts-override;
> + ri-override;
> + };
> +
> + - |
> + // Example with one clock:
> + serial@80230000 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x80230000 0x100>;
> + clocks = <&baudclk>;
> + interrupts = <10>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + };
> +
> + - |
> + // Example with two clocks:
> + serial@80230000 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x80230000 0x100>;
> + clocks = <&baudclk>, <&apb_pclk>;
> + clock-names = "baudclk", "apb_pclk";
> + interrupts = <10>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + };
> +...

\
 
 \ /
  Last update: 2019-01-14 10:31    [W:0.075 / U:1.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site