lkml.org 
[lkml]   [2019]   [Jan]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v9 12/22] m68k/mac: Use macros for RTC accesses not magic numbers
Date
This is intended to improve code style and not affect code behaviour.

Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
---
arch/m68k/mac/misc.c | 59 ++++++++++++++++++++++++++++++--------------
1 file changed, 41 insertions(+), 18 deletions(-)

diff --git a/arch/m68k/mac/misc.c b/arch/m68k/mac/misc.c
index 78c807025436..af000a015f68 100644
--- a/arch/m68k/mac/misc.c
+++ b/arch/m68k/mac/misc.c
@@ -136,6 +136,21 @@ static void via_rtc_send(__u8 data)
}
}

+/*
+ * These values can be found in Inside Macintosh vol. III ch. 2
+ * which has a description of the RTC chip in the original Mac.
+ */
+
+#define RTC_FLG_READ BIT(7)
+#define RTC_FLG_WRITE_PROTECT BIT(7)
+#define RTC_CMD_READ(r) (RTC_FLG_READ | (r << 2))
+#define RTC_CMD_WRITE(r) (r << 2)
+#define RTC_REG_SECONDS_0 0
+#define RTC_REG_SECONDS_1 1
+#define RTC_REG_SECONDS_2 2
+#define RTC_REG_SECONDS_3 3
+#define RTC_REG_WRITE_PROTECT 13
+
/*
* Execute a VIA PRAM/RTC command. For read commands
* data should point to a one-byte buffer for the
@@ -145,13 +160,17 @@ static void via_rtc_send(__u8 data)
* This function disables all interrupts while running.
*/

-static void via_pram_command(int command, __u8 *data)
+static void via_rtc_command(int command, __u8 *data)
{
unsigned long flags;
int is_read;

local_irq_save(flags);

+ /* The least significant bits must be 0b01 according to Inside Mac */
+
+ command = (command & ~3) | 1;
+
/* Enable the RTC and make sure the strobe line is high */

via1[vBufB] = (via1[vBufB] | VIA1B_vRTCClk) & ~VIA1B_vRTCEnb;
@@ -159,10 +178,10 @@ static void via_pram_command(int command, __u8 *data)
if (command & 0xFF00) { /* extended (two-byte) command */
via_rtc_send((command & 0xFF00) >> 8);
via_rtc_send(command & 0xFF);
- is_read = command & 0x8000;
+ is_read = command & (RTC_FLG_READ << 8);
} else { /* one-byte command */
via_rtc_send(command);
- is_read = command & 0x80;
+ is_read = command & RTC_FLG_READ;
}
if (is_read) {
*data = via_rtc_recv();
@@ -201,10 +220,10 @@ static time64_t via_read_time(void)
} result, last_result;
int count = 1;

- via_pram_command(0x81, &last_result.cdata[3]);
- via_pram_command(0x85, &last_result.cdata[2]);
- via_pram_command(0x89, &last_result.cdata[1]);
- via_pram_command(0x8D, &last_result.cdata[0]);
+ via_rtc_command(RTC_CMD_READ(RTC_REG_SECONDS_0), &last_result.cdata[3]);
+ via_rtc_command(RTC_CMD_READ(RTC_REG_SECONDS_1), &last_result.cdata[2]);
+ via_rtc_command(RTC_CMD_READ(RTC_REG_SECONDS_2), &last_result.cdata[1]);
+ via_rtc_command(RTC_CMD_READ(RTC_REG_SECONDS_3), &last_result.cdata[0]);

/*
* The NetBSD guys say to loop until you get the same reading
@@ -212,10 +231,14 @@ static time64_t via_read_time(void)
*/

while (1) {
- via_pram_command(0x81, &result.cdata[3]);
- via_pram_command(0x85, &result.cdata[2]);
- via_pram_command(0x89, &result.cdata[1]);
- via_pram_command(0x8D, &result.cdata[0]);
+ via_rtc_command(RTC_CMD_READ(RTC_REG_SECONDS_0),
+ &result.cdata[3]);
+ via_rtc_command(RTC_CMD_READ(RTC_REG_SECONDS_1),
+ &result.cdata[2]);
+ via_rtc_command(RTC_CMD_READ(RTC_REG_SECONDS_2),
+ &result.cdata[1]);
+ via_rtc_command(RTC_CMD_READ(RTC_REG_SECONDS_3),
+ &result.cdata[0]);

if (result.idata == last_result.idata)
return (time64_t)result.idata - RTC_OFFSET;
@@ -254,18 +277,18 @@ static void via_set_rtc_time(struct rtc_time *tm)
/* Clear the write protect bit */

temp = 0x55;
- via_pram_command(0x35, &temp);
+ via_rtc_command(RTC_CMD_WRITE(RTC_REG_WRITE_PROTECT), &temp);

data.idata = lower_32_bits(time + RTC_OFFSET);
- via_pram_command(0x01, &data.cdata[3]);
- via_pram_command(0x05, &data.cdata[2]);
- via_pram_command(0x09, &data.cdata[1]);
- via_pram_command(0x0D, &data.cdata[0]);
+ via_rtc_command(RTC_CMD_WRITE(RTC_REG_SECONDS_0), &data.cdata[3]);
+ via_rtc_command(RTC_CMD_WRITE(RTC_REG_SECONDS_1), &data.cdata[2]);
+ via_rtc_command(RTC_CMD_WRITE(RTC_REG_SECONDS_2), &data.cdata[1]);
+ via_rtc_command(RTC_CMD_WRITE(RTC_REG_SECONDS_3), &data.cdata[0]);

/* Set the write protect bit */

- temp = 0xD5;
- via_pram_command(0x35, &temp);
+ temp = 0x55 | RTC_FLG_WRITE_PROTECT;
+ via_rtc_command(RTC_CMD_WRITE(RTC_REG_WRITE_PROTECT), &temp);
}

static void via_shutdown(void)
--
2.19.2
\
 
 \ /
  Last update: 2019-01-15 05:23    [W:0.115 / U:3.300 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site