lkml.org 
[lkml]   [2019]   [Jan]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 10/14] arm64: dts: qcom: pm8005: add interrupt controller properties
On Sun 13 Jan 07:47 PST 2019, Brian Masney wrote:

> Add interrupt controller properties now that spmi-gpio is a proper
> hierarchical IRQ chip. The interrupts property is no longer needed so
> remove it.
>
> This change was not tested on any hardware but the same change was
> tested on qcom-pm8941.dtsi using a LG Nexus 5 (hammerhead) phone with
> no issues.
>

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

> Signed-off-by: Brian Masney <masneyb@onstation.org>
> ---
> This is a new patch introduced in V4.
>
> arch/arm64/boot/dts/qcom/pm8005.dtsi | 6 ++----
> 1 file changed, 2 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/pm8005.dtsi b/arch/arm64/boot/dts/qcom/pm8005.dtsi
> index 4d5aca3eeb69..c0ddf128136c 100644
> --- a/arch/arm64/boot/dts/qcom/pm8005.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pm8005.dtsi
> @@ -16,10 +16,8 @@
> reg = <0xc000>;
> gpio-controller;
> #gpio-cells = <2>;
> - interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
> - <0 0xc1 0 IRQ_TYPE_NONE>,
> - <0 0xc2 0 IRQ_TYPE_NONE>,
> - <0 0xc3 0 IRQ_TYPE_NONE>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> };
>
> };
> --
> 2.17.2
>

\
 
 \ /
  Last update: 2019-01-15 01:43    [W:0.203 / U:1.820 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site