lkml.org 
[lkml]   [2019]   [Jan]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 12/14] arm64: dts: qcom: pmi8994: add interrupt controller properties
Date
Add interrupt controller properties now that spmi-gpio is a proper
hierarchical IRQ chip. The interrupts property is no longer needed so
remove it.

This change was not tested on any hardware but the same change was
tested on qcom-pm8941.dtsi using a LG Nexus 5 (hammerhead) phone with
no issues.

Signed-off-by: Brian Masney <masneyb@onstation.org>
---
This is a new patch introduced in V4.

arch/arm64/boot/dts/qcom/pmi8994.dtsi | 12 ++----------
1 file changed, 2 insertions(+), 10 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/pmi8994.dtsi b/arch/arm64/boot/dts/qcom/pmi8994.dtsi
index dae1cdc23f54..3aee10e3f921 100644
--- a/arch/arm64/boot/dts/qcom/pmi8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmi8994.dtsi
@@ -15,16 +15,8 @@
reg = <0xc000>;
gpio-controller;
#gpio-cells = <2>;
- interrupts = <2 0xc0 0 IRQ_TYPE_NONE>,
- <2 0xc1 0 IRQ_TYPE_NONE>,
- <2 0xc2 0 IRQ_TYPE_NONE>,
- <2 0xc3 0 IRQ_TYPE_NONE>,
- <2 0xc4 0 IRQ_TYPE_NONE>,
- <2 0xc5 0 IRQ_TYPE_NONE>,
- <2 0xc6 0 IRQ_TYPE_NONE>,
- <2 0xc7 0 IRQ_TYPE_NONE>,
- <2 0xc8 0 IRQ_TYPE_NONE>,
- <2 0xc9 0 IRQ_TYPE_NONE>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
};
};

--
2.17.2
\
 
 \ /
  Last update: 2019-01-13 16:48    [W:0.233 / U:5.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site