[lkml]   [2019]   [Jan]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH] ARM64: dts: meson-gxbb-odroidc2: Fix usb phy regulator warning
Anand Moon <> writes:

> Hi Neil,
> On Fri, 11 Jan 2019 at 19:10, Neil Armstrong <> wrote:
>> Hi Anand,
>> On 11/01/2019 10:22, Anand Moon wrote:
>> > Add missing vin-supply 5V regulator node on usb_phy nodes needed
>> > to power usb bus ports. Override the dr_mode from "host" to "peripheral"
>> > for initialization of dwc2 usb0 phy node,changes fix the below
>> > warning for usb initialization.
>> I would have switch the dr_mode to peripheral in another patch,
>> fix the regulator issue in this patch only.
>> Neil
> [snip]
> Ok will split this into two patches and send after next dts updates.

When you split, please be specific about which part fixes which
problem. e.g. it appears the dr_mode fixes the WARNING from the
regulator core by itself, and the vin-supply fixes the usb resets,
correct? It wasn't obvious upon reading the changelog.

In either case, feel free to add:

Tested-by: Kevin Hilman <>

I tested on meson-gxbb-odroidc2 and it looks good.

Thanks for fixing this,


 \ /
  Last update: 2019-01-11 19:51    [W:0.069 / U:22.372 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site