lkml.org 
[lkml]   [2019]   [Jan]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH V5 2/4] thermal: imx_sc: add i.MX system controller thermal support
Date
Hi, Eduardo

Best Regards!
Anson Huang

> -----Original Message-----
> From: Anson Huang
> Sent: 2018年12月26日 11:36
> To: 'Eduardo Valentin' <edubezval@gmail.com>
> Cc: robh+dt@kernel.org; mark.rutland@arm.com; catalin.marinas@arm.com;
> will.deacon@arm.com; rui.zhang@intel.com; daniel.lezcano@linaro.org;
> Aisheng Dong <aisheng.dong@nxp.com>; s.hauer@pengutronix.de;
> shawnguo@kernel.org; Andy Gross <andy.gross@linaro.org>; arnd@arndb.de;
> horms+renesas@verge.net.au; heiko@sntech.de; bjorn.andersson@linaro.org;
> enric.balletbo@collabora.com; amit.kucheria@linaro.org;
> ezequiel@collabora.com; olof@lixom.net; devicetree@vger.kernel.org;
> linux-kernel@vger.kernel.org; linux-arm-kernel@lists.infradead.org;
> linux-pm@vger.kernel.org; dl-linux-imx <linux-imx@nxp.com>
> Subject: RE: [PATCH V5 2/4] thermal: imx_sc: add i.MX system controller
> thermal support
>
> Hi, Eduardo
>
> Best Regards!
> Anson Huang
>
> > -----Original Message-----
> > From: Eduardo Valentin [mailto:edubezval@gmail.com]
> > Sent: 2018年12月26日 6:44
> > To: Anson Huang <anson.huang@nxp.com>
> > Cc: robh+dt@kernel.org; mark.rutland@arm.com;
> catalin.marinas@arm.com;
> > will.deacon@arm.com; rui.zhang@intel.com; daniel.lezcano@linaro.org;
> > Aisheng Dong <aisheng.dong@nxp.com>; s.hauer@pengutronix.de;
> > shawnguo@kernel.org; Andy Gross <andy.gross@linaro.org>;
> > arnd@arndb.de;
> > horms+renesas@verge.net.au; heiko@sntech.de;
> > horms+bjorn.andersson@linaro.org;
> > enric.balletbo@collabora.com; amit.kucheria@linaro.org;
> > ezequiel@collabora.com; olof@lixom.net; devicetree@vger.kernel.org;
> > linux-kernel@vger.kernel.org; linux-arm-kernel@lists.infradead.org;
> > linux-pm@vger.kernel.org; dl-linux-imx <linux-imx@nxp.com>
> > Subject: Re: [PATCH V5 2/4] thermal: imx_sc: add i.MX system
> > controller thermal support
> >
> > On Thu, Dec 20, 2018 at 09:08:32AM +0000, Anson Huang wrote:
> > > i.MX8QXP is an ARMv8 SoC which has a Cortex-M4 system controller
> > > inside, the system controller is in charge of controlling power,
> > > clock and thermal sensors etc..
> > >
> > > This patch adds i.MX system controller thermal driver support, Linux
> > > kernel has to communicate with system controller via MU (message
> > > unit) IPC to get each thermal sensor's temperature, it supports
> > > multiple sensors which are passed from device tree, please see the
> > > binding doc for details.
> > >
> > > Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> > > ---
> > > ChangeLog since V4:
> > > - Add driver dependency on IMX_SCU to avoid compile error when
> > IMX_SCU is NOT selected;
> > > - Remove unnecessary of different errors handle for
> > imx_scu_get_handle, already included in API.
> > > ---
> > > drivers/thermal/Kconfig | 11 +++
> > > drivers/thermal/Makefile | 1 +
> > > drivers/thermal/imx_sc_thermal.c | 200
> > > +++++++++++++++++++++++++++++++++++++++
> > > 3 files changed, 212 insertions(+)
> > > create mode 100644 drivers/thermal/imx_sc_thermal.c
> > >
> > > diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index
> > > 0e69edc..8d4601d 100644
> > > --- a/drivers/thermal/Kconfig
> > > +++ b/drivers/thermal/Kconfig
> > > @@ -222,6 +222,17 @@ config IMX_THERMAL
> > > cpufreq is used as the cooling device to throttle CPUs when the
> > > passive trip is crossed.
> > >
> > > +config IMX_SC_THERMAL
> > > + tristate "Temperature sensor driver for NXP i.MX SoCs with System
> > Controller"
> > > + depends on (ARCH_MXC && IMX_SCU) || COMPILE_TEST
> > > + depends on OF
> > > + help
> > > + Support for Temperature Monitor (TEMPMON) found on NXP i.MX SoCs
> > with
> > > + system controller inside, Linux kernel has to communicate with system
> > > + controller via MU (message unit) IPC to get temperature from thermal
> > > + sensor. It supports one critical trip point and one
> > > + passive trip point for each thermal sensor.
> > > +
> > > config MAX77620_THERMAL
> > > tristate "Temperature sensor driver for Maxim MAX77620 PMIC"
> > > depends on MFD_MAX77620
> > > diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
> > > index 610344e..1b13f6a 100644
> > > --- a/drivers/thermal/Makefile
> > > +++ b/drivers/thermal/Makefile
> > > @@ -41,6 +41,7 @@ obj-$(CONFIG_DB8500_THERMAL) +=
> > db8500_thermal.o
> > > obj-$(CONFIG_ARMADA_THERMAL) += armada_thermal.o
> > > obj-$(CONFIG_TANGO_THERMAL) += tango_thermal.o
> > > obj-$(CONFIG_IMX_THERMAL) += imx_thermal.o
> > > +obj-$(CONFIG_IMX_SC_THERMAL) += imx_sc_thermal.o
> > > obj-$(CONFIG_MAX77620_THERMAL) += max77620_thermal.o
> > > obj-$(CONFIG_QORIQ_THERMAL) += qoriq_thermal.o
> > > obj-$(CONFIG_DA9062_THERMAL) += da9062-thermal.o
> > > diff --git a/drivers/thermal/imx_sc_thermal.c
> > > b/drivers/thermal/imx_sc_thermal.c
> > > new file mode 100644
> > > index 0000000..1030a31
> > > --- /dev/null
> > > +++ b/drivers/thermal/imx_sc_thermal.c
> > > @@ -0,0 +1,200 @@
> > > +// SPDX-License-Identifier: GPL-2.0+
> > > +/*
> > > + * Copyright 2018 NXP.
> > > + */
> > > +
> > > +#include <linux/err.h>
> > > +#include <linux/firmware/imx/sci.h> #include <linux/module.h>
> > > +#include <linux/of.h> #include <linux/of_device.h> #include
> > > +<linux/platform_device.h> #include <linux/slab.h> #include
> > > +<linux/thermal.h>
> > > +
> > > +#include "thermal_core.h"
> > > +
> > > +#define IMX_SC_MISC_FUNC_GET_TEMP 13
> > > +#define IMX_SC_C_TEMP 0
> > > +
> > > +static struct imx_sc_ipc *thermal_ipc_handle;
> > > +
> > > +struct imx_sc_sensor {
> > > + struct thermal_zone_device *tzd;
> > > + u32 resource_id;
> > > +};
> > > +
> > > +struct imx_sc_thermal_data {
> > > + struct imx_sc_sensor *sensor;
> > > +};
> > > +
> > > +struct req_get_temp {
> > > + u16 resource_id;
> > > + u8 type;
> > > +} __packed;
> > > +
> > > +struct resp_get_temp {
> > > + u16 celsius;
> > > + u8 tenths;
> > > +} __packed;
> > > +
> > > +struct imx_sc_msg_misc_get_temp {
> > > + struct imx_sc_rpc_msg hdr;
> > > + union {
> > > + struct req_get_temp req;
> > > + struct resp_get_temp resp;
> > > + } data;
> > > +} __packed;
> > > +
> > > +static int imx_sc_thermal_get_temp(void *data, int *temp) {
> > > + struct imx_sc_msg_misc_get_temp msg;
> > > + struct imx_sc_rpc_msg *hdr = &msg.hdr;
> > > + struct imx_sc_sensor *sensor = data;
> > > + int ret;
> > > +
> > > + msg.data.req.resource_id = sensor->resource_id;
> > > + msg.data.req.type = IMX_SC_C_TEMP;
> > > +
> > > + hdr->ver = IMX_SC_RPC_VERSION;
> > > + hdr->svc = IMX_SC_RPC_SVC_MISC;
> > > + hdr->func = IMX_SC_MISC_FUNC_GET_TEMP;
> > > + hdr->size = 2;
> > > +
> > > + ret = imx_scu_call_rpc(thermal_ipc_handle, &msg, true);
> > > + if (ret) {
> > > + pr_err("read temp sensor %d failed, ret %d\n",
> > > + sensor->resource_id, ret);
> > > + return ret;
> > > + }
> > > +
> > > + *temp = msg.data.resp.celsius * 1000 + msg.data.resp.tenths * 100;
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static const struct thermal_zone_of_device_ops imx_sc_thermal_ops = {
> > > + .get_temp = imx_sc_thermal_get_temp, };
> > > +
> > > +static int imx_sc_thermal_register_sensor(struct platform_device *pdev,
> > > + struct imx_sc_sensor *sensor) {
> > > + struct thermal_zone_device *tzd;
> > > +
> > > + tzd = devm_thermal_zone_of_sensor_register(&pdev->dev,
> > > + sensor->resource_id,
> > > + sensor,
> > > + &imx_sc_thermal_ops);
> > > + if (IS_ERR(tzd)) {
> > > + dev_err(&pdev->dev, "failed to register sensor: %d\n",
> > > + sensor->resource_id);
> > > + return PTR_ERR(tzd);
> > > + }
> > > +
> > > + sensor->tzd = tzd;
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static int imx_sc_thermal_get_sensor_id(struct device_node
> > > +*sensor_np, u32 *id) {
> > > + struct of_phandle_args sensor_specs;
> > > + int ret;
> > > +
> > > + ret = of_parse_phandle_with_args(sensor_np, "thermal-sensors",
> > > + "#thermal-sensor-cells",
> > > + 0, &sensor_specs);
> > > + if (ret)
> > > + return ret;
> > > +
> > > + if (sensor_specs.args_count >= 1) {
> > > + *id = sensor_specs.args[0];
> > > + WARN(sensor_specs.args_count > 1,
> > > + "%pOFn: too many cells in sensor specifier %d\n",
> > > + sensor_specs.np, sensor_specs.args_count);
> > > + } else {
> > > + return -EINVAL;
> > > + }
> > > +
> > > + return 0;
> > > +}
> > > +
> >
> > So, there should be no need for doing a search of sensor ids. In fact,
> > if the amount of sensors or the type of sensors supported changes, i.e.
> > the sensor ids are do not match, you should have a different compatible,
> IMO.
>
> So do you mean I can just read the sensor id (actually it is our SoC's resource id)
> from the DTB file's each child node of thermal_zones? Then I can skip the
> search of sensor ids, just add a sensor id property and read it out during
> thermal driver probe? Yes, this looks like easier, is my understanding correct?
> If yes, I can do it in next version. Thanks.
>
> Anson

Can you be more detail about the search of sensor ids? For this SoC, there will be more
sensors(thermal-zone) added later, like DDR controller thermal sensor and pmic sensor etc., they will use
same compatible, and in the imx_sc_thermal_get_sensor_id(), it just read out the sensor id
from the dtb's each thermal zone's " thermal-sensors " property, I did NOT see any search here, thanks!

Anson.

>
> >
> > > +static int imx_sc_thermal_probe(struct platform_device *pdev) {
> > > + struct device_node *np = pdev->dev.of_node;
> > > + struct device_node *sensor_np = NULL;
> > > + struct imx_sc_thermal_data *data;
> > > + struct imx_sc_sensor *sensors;
> > > + u32 sensor_num;
> > > + int ret, i;
> > > +
> > > + ret = imx_scu_get_handle(&thermal_ipc_handle);
> > > + if (ret)
> > > + return ret;
> > > +
> > > + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
> > > + if (!data)
> > > + return -ENOMEM;
> > > +
> > > + ret = of_property_read_u32(np, "tsens-num", &sensor_num);
> > > + if (ret || !sensor_num) {
> > > + dev_err(&pdev->dev, "failed to get valid temp sensor number!\n");
> > > + return -EINVAL;
> > > + }
> > > +
> > > + sensors = devm_kzalloc(&pdev->dev, sizeof(*data->sensor) * sensor_num,
> > > + GFP_KERNEL);
> > > + if (!sensors)
> > > + return -ENOMEM;
> > > +
> > > + data->sensor = sensors;
> > > +
> > > + np = of_find_node_by_name(NULL, "thermal-zones");
> > > + if (!np)
> > > + return -ENODEV;
> > > +
> > > + for (i = 0; i < sensor_num; i++) {
> > > + struct imx_sc_sensor *sensor = &data->sensor[i];
> > > +
> > > + sensor_np = of_get_next_child(np, sensor_np);
> > > + ret = imx_sc_thermal_get_sensor_id(sensor_np,
> > &sensor->resource_id);
> > > + if (ret < 0) {
> > > + dev_err(&pdev->dev,
> > > + "failed to get valid sensor resource id: %d\n",
> > > + ret);
> > > + break;
> > > + }
> > > +
> > > + ret = imx_sc_thermal_register_sensor(pdev, sensor);
> > > + if (ret) {
> > > + dev_err(&pdev->dev, "failed to register thermal sensor: %d\n",
> > > + ret);
> > > + break;
> > > + }
> > > + }
> > > +
> > > + of_node_put(np);
> > > + of_node_put(sensor_np);
> > > +
> > > + return ret;
> > > +}
> > > +
> > > +static const struct of_device_id imx_sc_thermal_table[] = {
> > > + { .compatible = "fsl,imx8qxp-sc-thermal", },
> > > + {}
> > > +};
> > > +MODULE_DEVICE_TABLE(of, imx_sc_thermal_table);
> > > +
> > > +static struct platform_driver imx_sc_thermal_driver = {
> > > + .probe = imx_sc_thermal_probe,
> > > + .driver = {
> > > + .name = "imx-sc-thermal",
> > > + .of_match_table = imx_sc_thermal_table,
> > > + },
> > > +};
> > > +module_platform_driver(imx_sc_thermal_driver);
> > > +
> > > +MODULE_AUTHOR("Anson Huang <Anson.Huang@nxp.com>");
> > > +MODULE_DESCRIPTION("Thermal driver for NXP i.MX SoCs with system
> > > +controller"); MODULE_LICENSE("GPL v2");
> > > --
> > > 2.7.4
> > >
\
 
 \ /
  Last update: 2019-01-10 10:28    [W:0.120 / U:1.788 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site