lkml.org 
[lkml]   [2018]   [Sep]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 2/8] usb: dwc3: update stream id in depcmd
Date
For stream capable endpoints, stream id related information
needs to be updated into DEPCMD while issuing START TRANSFER.
This patch does the same.

Signed-off-by: Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com>
Reviewed-by: Thinh Nguyen <thinhn@synopsys.com>
---
Changes in v4:
1. None

Changes in v3:
1. None

Changes in v2:
1. None
---
drivers/usb/dwc3/gadget.c | 3 +++
1 file changed, 3 insertions(+)

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 8a1622b..43d63a8 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1224,6 +1224,9 @@ static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep)
params.param1 = lower_32_bits(req->trb_dma);
cmd = DWC3_DEPCMD_STARTTRANSFER;

+ if (dep->stream_capable)
+ cmd |= DWC3_DEPCMD_PARAM(req->request.stream_id);
+
if (usb_endpoint_xfer_isoc(dep->endpoint.desc))
cmd |= DWC3_DEPCMD_PARAM(dep->frame_number);
} else {
--
2.1.1
\
 
 \ /
  Last update: 2018-09-08 17:04    [W:0.143 / U:0.492 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site