lkml.org 
[lkml]   [2018]   [Sep]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 3/3] dt-bindings: adxl372: Document the adxl372 I2C bindings
On Tue, 4 Sep 2018 17:13:14 +0300
Stefan Popa <stefan.popa@analog.com> wrote:

> The adxl372 is designed to communicate in either SPI or I2C protocol.
> This patch adds the documentation of device tree bindings for adxl372
> I2C.
>
> Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Applied.

Thanks,

Jonathan

> ---
> Documentation/devicetree/bindings/iio/accel/adxl372.txt | 15 +++++++++++++--
> 1 file changed, 13 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/iio/accel/adxl372.txt b/Documentation/devicetree/bindings/iio/accel/adxl372.txt
> index 9409984..a289964 100644
> --- a/Documentation/devicetree/bindings/iio/accel/adxl372.txt
> +++ b/Documentation/devicetree/bindings/iio/accel/adxl372.txt
> @@ -4,14 +4,25 @@ http://www.analog.com/media/en/technical-documentation/data-sheets/adxl372.pdf
>
> Required properties:
> - compatible : should be "adi,adxl372"
> - - reg: SPI chip select number for the device
> + - reg: the I2C address or SPI chip select number for the device
> +
> +Required properties for SPI bus usage:
> - spi-max-frequency: Max SPI frequency to use
>
> Optional properties:
> - interrupts: interrupt mapping for IRQ as documented in
> Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
>
> -Example:
> +Example for a I2C device node:
> +
> + accelerometer@53 {
> + compatible = "adi,adxl372";
> + reg = <0x53>;
> + interrupt-parent = <&gpio>;
> + interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
> + };
> +
> +Example for a SPI device node:
>
> accelerometer@0 {
> compatible = "adi,adxl372";

\
 
 \ /
  Last update: 2018-09-08 16:31    [W:0.034 / U:2.676 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site