lkml.org 
[lkml]   [2018]   [Sep]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 09/10] phy: Add Cadence D-PHY support
On Wed, Sep 05, 2018 at 04:48:27PM +0300, Laurent Pinchart wrote:
> Hi Maxime,
>
> Thank you for the patch.
>
> On Wednesday, 5 September 2018 12:16:40 EEST Maxime Ripard wrote:
> > Cadence has designed a D-PHY that can be used by the, currently in tree,
> > DSI bridge (DRM), CSI Transceiver and CSI Receiver (v4l2) drivers.
> >
> > Only the DSI driver has an ad-hoc driver for that phy at the moment, while
> > the v4l2 drivers are completely missing any phy support. In order to make
> > that phy support available to all these drivers, without having to
> > duplicate that code three times, let's create a generic phy framework
> > driver.
> >
> > Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
> > ---
> > drivers/phy/Kconfig | 1 +-
> > drivers/phy/Makefile | 1 +-
> > drivers/phy/cadence/Kconfig | 13 +-
> > drivers/phy/cadence/Makefile | 1 +-
> > drivers/phy/cadence/cdns-dphy.c | 499 +++++++++++++++++++++++++++++++++-
>
> Should the DT bindings be split from Documentation/devicetree/bindings/
> display/bridge/cdns,dsi.txt ?

Yep, I'll change it.

Thanks!
Maxime

--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2018-09-07 15:38    [W:0.100 / U:0.824 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site