lkml.org 
[lkml]   [2018]   [Sep]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH i2c-next v6] i2c: aspeed: Handle master/slave combined irq events properly
On Thu, Aug 23, 2018 at 03:57:31PM -0700, Jae Hyun Yoo wrote:
> In most of cases, interrupt bits are set one by one but there are
> also a lot of other cases that Aspeed I2C IP sends multiple
> interrupt bits with combining master and slave events using a
> single interrupt call. It happens much more in multi-master
> environment than single-master. For an example, when master is
> waiting for a NORMAL_STOP interrupt in its MASTER_STOP state,
> SLAVE_MATCH and RX_DONE interrupts could come along with the
> NORMAL_STOP in case of an another master immediately sends data
> just after acquiring the bus. In this case, the NORMAL_STOP
> interrupt should be handled by master_irq and the SLAVE_MATCH and
> RX_DONE interrupts should be handled by slave_irq. This commit
> modifies irq hadling logic to handle the master/slave combined
> events properly.
>
> Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>

Applied to for-next, thanks!

[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2018-09-06 20:41    [W:0.090 / U:31.848 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site