lkml.org 
[lkml]   [2018]   [Sep]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 11/21] powerpc: use for_each_of_cpu_node iterator
Date
Use the for_each_of_cpu_node iterator to iterate over cpu nodes. This
has the side effect of defaulting to iterating using "cpu" node names in
preference to the deprecated (for FDT) device_type == "cpu".

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Rob Herring <robh@kernel.org>
---
Please ack and I will take via the DT tree. This is dependent on the
first 2 patches.

arch/powerpc/platforms/powermac/feature.c | 51 ++++++++---------------
arch/powerpc/platforms/powermac/setup.c | 15 +++----
2 files changed, 26 insertions(+), 40 deletions(-)

diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c
index 4eb8cb38fc69..ed2f54b3f173 100644
--- a/arch/powerpc/platforms/powermac/feature.c
+++ b/arch/powerpc/platforms/powermac/feature.c
@@ -1049,7 +1049,6 @@ core99_reset_cpu(struct device_node *node, long param, long value)
unsigned long flags;
struct macio_chip *macio;
struct device_node *np;
- struct device_node *cpus;
const int dflt_reset_lines[] = { KL_GPIO_RESET_CPU0,
KL_GPIO_RESET_CPU1,
KL_GPIO_RESET_CPU2,
@@ -1059,10 +1058,7 @@ core99_reset_cpu(struct device_node *node, long param, long value)
if (macio->type != macio_keylargo)
return -ENODEV;

- cpus = of_find_node_by_path("/cpus");
- if (cpus == NULL)
- return -ENODEV;
- for (np = cpus->child; np != NULL; np = np->sibling) {
+ for_each_of_cpu_node(np) {
const u32 *num = of_get_property(np, "reg", NULL);
const u32 *rst = of_get_property(np, "soft-reset", NULL);
if (num == NULL || rst == NULL)
@@ -1072,7 +1068,6 @@ core99_reset_cpu(struct device_node *node, long param, long value)
break;
}
}
- of_node_put(cpus);
if (np == NULL || reset_io == 0)
reset_io = dflt_reset_lines[param];

@@ -1504,16 +1499,12 @@ static long g5_reset_cpu(struct device_node *node, long param, long value)
unsigned long flags;
struct macio_chip *macio;
struct device_node *np;
- struct device_node *cpus;

macio = &macio_chips[0];
if (macio->type != macio_keylargo2 && macio->type != macio_shasta)
return -ENODEV;

- cpus = of_find_node_by_path("/cpus");
- if (cpus == NULL)
- return -ENODEV;
- for (np = cpus->child; np != NULL; np = np->sibling) {
+ for_each_of_cpu_node(np) {
const u32 *num = of_get_property(np, "reg", NULL);
const u32 *rst = of_get_property(np, "soft-reset", NULL);
if (num == NULL || rst == NULL)
@@ -1523,7 +1514,6 @@ static long g5_reset_cpu(struct device_node *node, long param, long value)
break;
}
}
- of_node_put(cpus);
if (np == NULL || reset_io == 0)
return -ENODEV;

@@ -2515,31 +2505,26 @@ static int __init probe_motherboard(void)
* supposed to be set when not supported, but I'm not very confident
* that all Apple OF revs did it properly, I do it the paranoid way.
*/
- while (uninorth_base && uninorth_rev > 3) {
- struct device_node *cpus = of_find_node_by_path("/cpus");
+ if (uninorth_base && uninorth_rev > 3) {
struct device_node *np;

- if (!cpus || !cpus->child) {
- printk(KERN_WARNING "Can't find CPU(s) in device tree !\n");
- of_node_put(cpus);
- break;
- }
- np = cpus->child;
- /* Nap mode not supported on SMP */
- if (np->sibling) {
- of_node_put(cpus);
- break;
- }
- /* Nap mode not supported if flush-on-lock property is present */
- if (of_get_property(np, "flush-on-lock", NULL)) {
- of_node_put(cpus);
- break;
+ for_each_of_cpu_node(np) {
+ int cpu_count = 1;
+
+ /* Nap mode not supported on SMP */
+ if (of_get_property(np, "flush-on-lock", NULL) ||
+ (cpu_count > 1)) {
+ powersave_nap = 0;
+ of_node_put(np);
+ break;
+ }
+
+ cpu_count++;
+ powersave_nap = 1;
}
- of_node_put(cpus);
- powersave_nap = 1;
- printk(KERN_DEBUG "Processor NAP mode on idle enabled.\n");
- break;
}
+ if (powersave_nap)
+ printk(KERN_DEBUG "Processor NAP mode on idle enabled.\n");

/* On CPUs that support it (750FX), lowspeed by default during
* NAP mode
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index 3a529fcdae97..2f00e3daafb0 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -243,10 +243,9 @@ static void __init l2cr_init(void)
{
/* Checks "l2cr-value" property in the registry */
if (cpu_has_feature(CPU_FTR_L2CR)) {
- struct device_node *np = of_find_node_by_name(NULL, "cpus");
- if (!np)
- np = of_find_node_by_type(NULL, "cpu");
- if (np) {
+ struct device_node *np;
+
+ for_each_of_cpu_node(np) {
const unsigned int *l2cr =
of_get_property(np, "l2cr-value", NULL);
if (l2cr) {
@@ -256,6 +255,7 @@ static void __init l2cr_init(void)
_set_L2CR(ppc_override_l2cr_value);
}
of_node_put(np);
+ break;
}
}

@@ -279,8 +279,8 @@ static void __init pmac_setup_arch(void)
/* Set loops_per_jiffy to a half-way reasonable value,
for use until calibrate_delay gets called. */
loops_per_jiffy = 50000000 / HZ;
- cpu = of_find_node_by_type(NULL, "cpu");
- if (cpu != NULL) {
+
+ for_each_of_cpu_node(cpu) {
fp = of_get_property(cpu, "clock-frequency", NULL);
if (fp != NULL) {
if (pvr >= 0x30 && pvr < 0x80)
@@ -292,8 +292,9 @@ static void __init pmac_setup_arch(void)
else
/* 601, 603, etc. */
loops_per_jiffy = *fp / (2 * HZ);
+ of_node_put(cpu);
+ break;
}
- of_node_put(cpu);
}

/* See if newworld or oldworld */
--
2.17.1
\
 
 \ /
  Last update: 2018-09-05 21:40    [W:0.368 / U:3.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site