lkml.org 
[lkml]   [2018]   [Sep]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] x86/mm/KASLR: Adjust the vmemmap size according to paging mode
On Wed, Sep 05, 2018 at 08:15:31AM +0000, Baoquan He wrote:
> On 09/04/18 at 11:13am, Kirill A. Shutemov wrote:
> > On Mon, Sep 03, 2018 at 10:52:13PM +0800, Baoquan He wrote:
> > > On 09/03/18 at 01:26pm, Kirill A. Shutemov wrote:
> > > > > > But there's corner case when struct page is unreasonably large and
> > > > > > vmemmap_size will be way to large. We probably have to report an error if
> > > > > > we cannot fit vmemmap properly into virtual memory layout.
> > > > >
> > > > > Hmm, sizeof(struct page) can't exceed one whole page surely, otherwise
> > > > > system bootup can't go over vmemmap initlization. Except of this, we may
> > > > > need think about the virtual memory layout which vmemmap can be allowed
> > > > > to occupy.
> > > > >
> > > > > If KASAN enabled, KASLR disabled,
> > > > > 4-level 1TB + 1TB hole (2TB)
> > > > > 5-level 512TB + 2034TB hole (2.5PB)
> > > > >
> > > > > If KASAN disabled, KASLR enabled,
> > > > > 4-level 1TB + 1TB hole + 16TB (18TB)
> > > > > 5-level 512TB + 2034TB hole + 8PB (10.5PB)
> > > > >
> > > > > So, as you can see, if add check in memory KASLR code, we should only
> > > > > consider KASLR enabled case. We possibly don't need to worry about
> > > > > 5-level case since the size 10.5PB is even bigger than the maximum
> > > > > physical RAM mapping size. For 4-level, 18TB align to multiples of 2, it
> > > > > will be 32 times of the current 1TB, then we usually assume 64 as the
> > > > > default value of sizeof(struct page), then 64*32 == 1024. So we can add
> ~~~64*32 = 2048
> Sorry, I made mistake here.
> > > > > check like this, what do you think? Or any other idea?
> > > >
> > > > Looks reasonable to me.
> > > >
> > > > But I would have the BUILD_BUG_ON() in generic code. If you struct page is
> > > > more than 1/4 of PAGE_SIZE something is horribly broken.
> > >
> > > Just the 1/4 of PAGE_SIZE is based on analysis of KASLR case. If
> > > non-KASLR case, it may not be that value.
> >
> > Even if it technically possible to have struct page larger than
> > PAGE_SIZE/4, it's just insane.
> >
> > > Not sure if it's OK to put it in generic code, and haven't thought of a
> > > good place, maybe in setup_arch(), just at the beginning?
> >
> > I don't see an obvious place too. Maybe free_area_init_nodes()?
>
> OK, you mean a more generic place, I only considered generic place in
> x86. The thing is not all ARCH-es set PAGE_SIZE as 4KB, e.g power and
> arm64 can have PAGE_SIZE of 64KB. For them, PAGE_SIZE/4, namely 16KB,
> is hardly reached. So my thought is either taking PAGE_SIZE/4 in x86
> arch only, or using SZ_1K in free_area_init_nodes() as you suggested.
> What do you think?

BUILD_BUG_ON() on min(SZ_1K, PAGE_SIZE/4)?

--
Kirill A. Shutemov

\
 
 \ /
  Last update: 2018-09-05 14:13    [W:0.109 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site