lkml.org 
[lkml]   [2018]   [Sep]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 15/16] driver/edac: enable Hygon support to AMD64 EDAC driver
Subject should be:

EDAC, amd64: Add Hygon Dhyana support

On Wed, Aug 29, 2018 at 08:45:45PM +0800, Pu Wen wrote:
> To make AMD64 EDAC and MCE drivers working on Hygon platforms, add
> support for Hygon by using the code path of AMD family 0x17.
>
> As Hygon will negotiate with AMD to make sure that only Hygon will
> use family 0x18, under this consideration try to minimize code
> modifications and share most codes with AMD.
>
> Also Hygon PCI Device ID DF_F0/DF_F6(0x1460/0x1466) of Host bridges
> is needed for edac driver.
>
> Signed-off-by: Pu Wen <puwen@hygon.cn>
> ---
> drivers/edac/amd64_edac.c | 20 +++++++++++++++++++-
> drivers/edac/amd64_edac.h | 4 ++++
> drivers/edac/mce_amd.c | 4 +++-
> 3 files changed, 26 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
> index 18aeabb..d8b4b0e 100644
> --- a/drivers/edac/amd64_edac.c
> +++ b/drivers/edac/amd64_edac.c
> @@ -211,7 +211,7 @@ static int __set_scrub_rate(struct amd64_pvt *pvt, u32 new_bw, u32 min_rate)
>
> scrubval = scrubrates[i].scrubval;
>
> - if (pvt->fam == 0x17) {
> + if (pvt->fam == 0x17 || pvt->fam == 0x18) {
> __f17h_set_scrubval(pvt, scrubval);
> } else if (pvt->fam == 0x15 && pvt->model == 0x60) {
> f15h_select_dct(pvt, 0);
> @@ -264,6 +264,7 @@ static int get_scrub_rate(struct mem_ctl_info *mci)
> break;
>
> case 0x17:
> + case 0x18:
> amd64_read_pci_cfg(pvt->F6, F17H_SCR_BASE_ADDR, &scrubval);
> if (scrubval & BIT(0)) {
> amd64_read_pci_cfg(pvt->F6, F17H_SCR_LIMIT_ADDR, &scrubval);
> @@ -1044,6 +1045,7 @@ static void determine_memory_type(struct amd64_pvt *pvt)
> goto ddr3;
>
> case 0x17:
> + case 0x18:
> if ((pvt->umc[0].dimm_cfg | pvt->umc[1].dimm_cfg) & BIT(5))
> pvt->dram_type = MEM_LRDDR4;
> else if ((pvt->umc[0].dimm_cfg | pvt->umc[1].dimm_cfg) & BIT(4))
> @@ -2200,6 +2202,16 @@ static struct amd64_family_type family_types[] = {
> .dbam_to_cs = f17_base_addr_to_cs_size,
> }
> },
> + [HYGON_F18_CPUS] = {
> + /* Hygon F18h uses the same AMD F17h support */
> + .ctl_name = "Hygon_F18h",
> + .f0_id = PCI_DEVICE_ID_HYGON_18H_DF_F0,
> + .f6_id = PCI_DEVICE_ID_HYGON_18H_DF_F6,
> + .ops = {
> + .early_channel_count = f17_early_channel_count,
> + .dbam_to_cs = f17_base_addr_to_cs_size,
> + }
> + },
> };
>
> /*
> @@ -3192,6 +3204,11 @@ static struct amd64_family_type *per_family_init(struct amd64_pvt *pvt)
> pvt->ops = &family_types[F17_CPUS].ops;
> break;
>
> + case 0x18:
> + fam_type = &family_types[HYGON_F18_CPUS];
> + pvt->ops = &family_types[HYGON_F18_CPUS].ops;
> + break;
> +

You can use the F17_CPUS array element here and overwrite the ->ctl_name
string only. No need to define [HYGON_F18_CPUS] above... yet.

> default:
> amd64_err("Unsupported family!\n");
> return NULL;
> @@ -3428,6 +3445,7 @@ static const struct x86_cpu_id amd64_cpuids[] = {
> { X86_VENDOR_AMD, 0x15, X86_MODEL_ANY, X86_FEATURE_ANY, 0 },
> { X86_VENDOR_AMD, 0x16, X86_MODEL_ANY, X86_FEATURE_ANY, 0 },
> { X86_VENDOR_AMD, 0x17, X86_MODEL_ANY, X86_FEATURE_ANY, 0 },
> + { X86_VENDOR_HYGON, 0x18, X86_MODEL_ANY, X86_FEATURE_ANY, 0 },
> { }
> };
> MODULE_DEVICE_TABLE(x86cpu, amd64_cpuids);
> diff --git a/drivers/edac/amd64_edac.h b/drivers/edac/amd64_edac.h
> index 1d4b74e..6e5f609 100644
> --- a/drivers/edac/amd64_edac.h
> +++ b/drivers/edac/amd64_edac.h
> @@ -116,6 +116,9 @@
> #define PCI_DEVICE_ID_AMD_17H_DF_F0 0x1460
> #define PCI_DEVICE_ID_AMD_17H_DF_F6 0x1466
>
> +#define PCI_DEVICE_ID_HYGON_18H_DF_F0 0x1460
> +#define PCI_DEVICE_ID_HYGON_18H_DF_F6 0x1466

As in the previous patch - use the AMD defines.

--
Regards/Gruss,
Boris.

Good mailing practices for 400: avoid top-posting and trim the reply.

\
 
 \ /
  Last update: 2018-09-05 12:45    [W:0.396 / U:0.300 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site