lkml.org 
[lkml]   [2018]   [Sep]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 1/2] iommu/arm-smmu-v3: fix unexpected CMD_SYNC timeout
From
Date


On 2018/8/19 15:02, Leizhen (ThunderTown) wrote:
>
>
> On 2018/8/16 17:27, Robin Murphy wrote:
>> On 2018-08-16 10:18 AM, Will Deacon wrote:
>>> On Thu, Aug 16, 2018 at 04:21:17PM +0800, Leizhen (ThunderTown) wrote:
>>>> On 2018/8/15 20:26, Robin Murphy wrote:
>>>>> On 15/08/18 11:23, Zhen Lei wrote:
>>>>>> diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c
>>>>>> index 1d64710..3f5c236 100644
>>>>>> --- a/drivers/iommu/arm-smmu-v3.c
>>>>>> +++ b/drivers/iommu/arm-smmu-v3.c
>>>>>> @@ -566,7 +566,7 @@ struct arm_smmu_device {
>>>>>>
>>>>>> int gerr_irq;
>>>>>> int combined_irq;
>>>>>> - atomic_t sync_nr;
>>>>>> + u32 sync_nr;
>>>>>>
>>>>>> unsigned long ias; /* IPA */
>>>>>> unsigned long oas; /* PA */
>>>>>> @@ -775,6 +775,11 @@ static int queue_remove_raw(struct arm_smmu_queue *q, u64 *ent)
>>>>>> return 0;
>>>>>> }
>>>>>>
>>>>>> +static inline void arm_smmu_cmdq_sync_set_msidata(u64 *cmd, u32 msidata)
>>>>>
>>>>> If we *are* going to go down this route then I think it would make sense
>>>>> to move the msiaddr and CMDQ_SYNC_0_CS_MSI logic here as well; i.e.
>>>>> arm_smmu_cmdq_build_cmd() always generates a "normal" SEV-based sync
>>>>> command, then calling this guy would convert it to an MSI-based one.
>>>>> As-is, having bits of mutually-dependent data handled across two
>>>>> separate places just seems too messy and error-prone.
>>>>
>>>> Yes, How about create a new function "arm_smmu_cmdq_build_sync_msi_cmd"?
>>>>
>>>> static inline
>>>> void arm_smmu_cmdq_build_sync_msi_cmd(u64 *cmd, struct arm_smmu_cmdq_ent *ent)
>>>> {
>>>> cmd[0] = FIELD_PREP(CMDQ_0_OP, ent->opcode);
>>>> cmd[0] |= FIELD_PREP(CMDQ_SYNC_0_CS, CMDQ_SYNC_0_CS_IRQ);
>>>> cmd[0] |= FIELD_PREP(CMDQ_SYNC_0_MSH, ARM_SMMU_SH_ISH);
>>>> cmd[0] |= FIELD_PREP(CMDQ_SYNC_0_MSIATTR, ARM_SMMU_MEMATTR_OIWB);
>
> miss: cmd[0] |= FIELD_PREP(CMDQ_SYNC_0_MSIDATA, ent->sync.msidata);
>
>>>> cmd[1] = ent->sync.msiaddr & CMDQ_SYNC_1_MSIADDR_MASK;
>>>> }
>>>
>>> None of this seems justified given the numbers from John, so please just do
>>> the simple thing and build the command with the lock held.
>
> In order to observe the optimization effect, I conducted 5 tests for each
> case. Although the test result is volatility, but we can still get which case
> is good or bad. It accords with our theoretical analysis.
>
> Test command: fio -numjobs=8 -rw=randread -runtime=30 ... -bs=4k
> Test Result: IOPS, for example: read : io=86790MB, bw=2892.1MB/s, iops=740586, runt= 30001msec
>
> Case 1: (without these patches)
> 675480
> 672055
> 665275
> 648610
> 661146
>
> Case 2: (move arm_smmu_cmdq_build_cmd into lock)

https://lore.kernel.org/patchwork/patch/973121/
[v2,1/2] iommu/arm-smmu-v3: fix unexpected CMD_SYNC timeout

> 688714
> 697355
> 632951
> 700540
> 678459
>
> Case 3: (base on case 2, replace arm_smmu_cmdq_build_cmd with arm_smmu_cmdq_build_sync_msi_cmd)

https://patchwork.kernel.org/patch/10569675/
[v4,1/2] iommu/arm-smmu-v3: fix unexpected CMD_SYNC timeout

> 721582
> 729226
> 689574
> 679710
> 727770
>
> Case 4: (base on case 3, plus patch 2)
> 734077
> 742868
> 738194
> 682544
> 740586
>
> Case 2 is better than case 1, I think the main reason is the atomic_inc_return_relaxed(&smmu->sync_nr)
> has been removed. Case 3 is better than case 2, because the assembly code is reduced, see below.

Hi, Will
Have you received this email? Which case do you prefer? Suppose we don't consider patch 2, according
to the test result, maybe we should choose case3.
Because John Garry wants patch 2 to cover the non-MSI branch also, this may take some time. So can
you decide and apply patch 1 first?


>
>
>>
>> Agreed - sorry if my wording was unclear, but that suggestion was only for the possibility of it proving genuinely worthwhile to build the command outside the lock. Since that isn't the case, I definitely prefer the simpler approach too.
>
> Yes, I mean replace arm_smmu_cmdq_build_cmd with arm_smmu_cmdq_build_sync_msi_cmd to build the command inside the lock.
> spin_lock_irqsave(&smmu->cmdq.lock, flags);
> + ent.sync.msidata = ++smmu->sync_nr;
> + arm_smmu_cmdq_build_sync_msi_cmd(cmd, &ent);
> arm_smmu_cmdq_insert_cmd(smmu, cmd);
> spin_unlock_irqrestore(&smmu->cmdq.lock, flags);
>
> The assembly code showed me that it's very nice.
> ffff0000085e6928: 94123207 bl ffff000008a73144 <_raw_spin_lock_irqsave>
> ffff0000085e692c: b9410ad5 ldr w21, [x22,#264]
> ffff0000085e6930: d28208c2 mov x2, #0x1046 // #4166
> ffff0000085e6934: aa0003fa mov x26, x0
> ffff0000085e6938: 110006b5 add w21, w21, #0x1
> ffff0000085e693c: f2a1f802 movk x2, #0xfc0, lsl #16
> ffff0000085e6940: aa1603e0 mov x0, x22
> ffff0000085e6944: 910163a1 add x1, x29, #0x58
> ffff0000085e6948: aa158042 orr x2, x2, x21, lsl #32
> ffff0000085e694c: b9010ad5 str w21, [x22,#264]
> ffff0000085e6950: f9002fa2 str x2, [x29,#88]
> ffff0000085e6954: d2994016 mov x22, #0xca00 // #51712
> ffff0000085e6958: f90033b3 str x19, [x29,#96]
> ffff0000085e695c: 97fffd5b bl ffff0000085e5ec8 <arm_smmu_cmdq_insert_cmd>
> ffff0000085e6960: aa1903e0 mov x0, x25
> ffff0000085e6964: aa1a03e1 mov x1, x26
> ffff0000085e6968: f2a77356 movk x22, #0x3b9a, lsl #16
> ffff0000085e696c: 94123145 bl ffff000008a72e80 <_raw_spin_unlock_irqrestore>
>
>
>>
>> Robin.
>>
>> .
>>
>

--
Thanks!
BestRegards

\
 
 \ /
  Last update: 2018-09-05 03:47    [W:0.069 / U:0.772 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site