lkml.org 
[lkml]   [2018]   [Sep]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 00/10] phy: Add configuration interface for MIPI D-PHY devices
Date
Hi,

Here is a set of patches to allow the phy framework consumers to test and
apply runtime configurations.

This is needed to support more phy classes that require tuning based on
parameters depending on the current use case of the device, in addition to
the power state management already provided by the current functions.

A first test bed for that API are the MIPI D-PHY devices. There's a number
of solutions that have been used so far to support these phy, most of the
time being an ad-hoc driver in the consumer.

That approach has a big shortcoming though, which is that this is quite
difficult to deal with consumers integrated with multiple variants of phy,
of multiple consumers integrated with the same phy.

The latter case can be found in the Cadence DSI bridge, and the CSI
transceiver and receivers. All of them are integrated with the same phy, or
can be integrated with different phy, depending on the implementation.

I've looked at all the MIPI DSI drivers I could find, and gathered all the
parameters I could find. The interface should be complete, and most of the
drivers can be converted in the future. The current set converts two of
them: the above mentionned Cadence DSI driver so that the v4l2 drivers can
use them, and the Allwinner MIPI-DSI driver.

Let me know what you think,
Maxime

Maxime Ripard (10):
phy: Add MIPI D-PHY mode
phy: Add configuration interface
phy: Add MIPI D-PHY configuration options
phy: dphy: Add configuration helpers
sun6i: dsi: Convert to generic phy handling
phy: Move Allwinner A31 D-PHY driver to drivers/phy/
drm/bridge: cdns: Remove mode_check test
drm/bridge: cdns: Separate DSI and D-PHY configuration
phy: Add Cadence D-PHY support
drm/bridge: cdns: Convert to phy framework

drivers/gpu/drm/bridge/cdns-dsi.c | 506 ++-------------------
drivers/gpu/drm/sun4i/Kconfig | 3 +-
drivers/gpu/drm/sun4i/Makefile | 5 +-
drivers/gpu/drm/sun4i/sun6i_mipi_dphy.c | 292 +------------
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 30 +-
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h | 17 +-
drivers/phy/Kconfig | 9 +-
drivers/phy/Makefile | 2 +-
drivers/phy/allwinner/Kconfig | 12 +-
drivers/phy/allwinner/Makefile | 1 +-
drivers/phy/allwinner/phy-sun6i-mipi-dphy.c | 322 +++++++++++++-
drivers/phy/cadence/Kconfig | 13 +-
drivers/phy/cadence/Makefile | 1 +-
drivers/phy/cadence/cdns-dphy.c | 499 +++++++++++++++++++++-
drivers/phy/phy-core-mipi-dphy.c | 160 +++++++-
drivers/phy/phy-core.c | 62 +++-
include/linux/phy/phy-mipi-dphy.h | 247 ++++++++++-
include/linux/phy/phy.h | 49 ++-
18 files changed, 1455 insertions(+), 775 deletions(-)
delete mode 100644 drivers/gpu/drm/sun4i/sun6i_mipi_dphy.c
create mode 100644 drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
create mode 100644 drivers/phy/cadence/Kconfig
create mode 100644 drivers/phy/cadence/Makefile
create mode 100644 drivers/phy/cadence/cdns-dphy.c
create mode 100644 drivers/phy/phy-core-mipi-dphy.c
create mode 100644 include/linux/phy/phy-mipi-dphy.h

base-commit: 5b394b2ddf0347bef56e50c69a58773c94343ff3
--
git-series 0.9.1

\
 
 \ /
  Last update: 2018-09-05 11:19    [W:0.223 / U:4.704 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site