lkml.org 
[lkml]   [2018]   [Sep]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] mtd: onenand: fix parameter list build warning
Hi Randy,

Randy Dunlap <rdunlap@infradead.org> wrote on Tue, 4 Sep 2018 14:49:00
-0700:

> On 09/04/2018 02:34 PM, Miquel Raynal wrote:
> > Hi Randy,
> >
> > Randy Dunlap <rdunlap@infradead.org> wrote on Mon, 3 Sep 2018 12:32:04
> > -0700:
> >
> >> From: Randy Dunlap <rdunlap@infradead.org>
> >>
> >> Fix build warning in <linux/mtd/onenand.h> by adding a "stub" struct
> >> for mtd_oob_ops:
> >>
> >> include/linux/mtd/onenand.h: warning: 'struct mtd_oob_ops' declared inside parameter list [enabled by default]
> >> include/linux/mtd/onenand.h: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default]
> >>
> >> Fixes: 607d1cb10426 ("[MTD] [OneNAND] proper onenand_bbt_read_oob() prototype")
> >>
> >> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
> >> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> >> Cc: Kyungmin Park <kyungmin.park@samsung.com>
> >> Cc: linux-mtd@lists.infradead.org
> >> Cc: David Woodhouse <dwmw2@infradead.org>
> >> Cc: Brian Norris <computersforpeace@gmail.com>
> >> Cc: Boris Brezillon <boris.brezillon@bootlin.com>
> >> Cc: Marek Vasut <marek.vasut@gmail.com>
> >> Cc: Richard Weinberger <richard@nod.at>
> >> Cc: Adrian Bunk <bunk@kernel.org>
> >> Cc: Adrian Bunk <bunk@debian.org>
> >> ---
> >> include/linux/mtd/onenand.h | 1 +
> >> 1 file changed, 1 insertion(+)
> >>
> >> --- lnx-419-rc2.orig/include/linux/mtd/onenand.h
> >> +++ lnx-419-rc2/include/linux/mtd/onenand.h
> >> @@ -221,6 +221,7 @@ struct onenand_manufacturers {
> >> char *name;
> >> };
> >>
> >> +struct mtd_oob_ops;
> >> int onenand_bbt_read_oob(struct mtd_info *mtd, loff_t from,
> >> struct mtd_oob_ops *ops);
> >> unsigned onenand_block(struct onenand_chip *this, loff_t addr);
> >
> > That's indeed a working solution, but there are a lot of other
> > structures in this file that come (like mtd_oob_ops) from
> > linux/mtd/mtd.h so I wonder if it would not make more sense to include
> > this header here?
> >
> > Thanks,
> > Miquèl
>
>
> Hi,
> Have you see this from Linus?
>
> https://lore.kernel.org/lkml/CA+55aFzMBptQt-QHMR0MM9MA3=1rxcf8ca5qHxrf4Mm0ZobE_A@mail.gmail.com/

I did not know this position, thanks for sharing.

However, I don't think we fall under the same situation here.

On a purely theoretical point of view, onenand is a type of MTD device,
and almost all the core structures it uses are from linux/mtd/mtd.h so
for me it seems an error not to include it.

After looking more closely at the code, the following files include
onenand.h:

$ ~/linux [master]$ git grep -l onenand.h
arch/arm/mach-mmp/ttc_dkb.c
arch/arm/mach-pxa/saar.c
arch/arm/mach-pxa/vpac270.c
arch/arm/plat-samsung/devs.c
arch/sh/boards/mach-kfr2r09/setup.c
drivers/mtd/nand/onenand/generic.c
drivers/mtd/nand/onenand/omap2.c
drivers/mtd/nand/onenand/onenand_base.c
drivers/mtd/nand/onenand/onenand_bbt.c
drivers/mtd/nand/onenand/samsung.c
include/linux/mtd/onenand.h

And the following files also already include mtd.h (before including onenand.h):

$ ~/linux [master]$ git grep -l onenand.h|xargs grep mtd.h
arch/arm/mach-mmp/ttc_dkb.c:#include <linux/mtd/mtd.h>
arch/arm/mach-pxa/saar.c:#include <linux/mtd/mtd.h>
arch/arm/mach-pxa/vpac270.c:#include <linux/mtd/mtd.h>
arch/arm/plat-samsung/devs.c:#include <linux/mtd/mtd.h>
drivers/mtd/nand/onenand/generic.c:#include <linux/mtd/mtd.h>
drivers/mtd/nand/onenand/omap2.c:#include <linux/mtd/mtd.h>
drivers/mtd/nand/onenand/onenand_base.c:#include <linux/mtd/mtd.h>
drivers/mtd/nand/onenand/onenand_bbt.c:#include <linux/mtd/mtd.h>
drivers/mtd/nand/onenand/samsung.c:#include <linux/mtd/mtd.h>

The only file not already including directly mtd.h is:
arch/sh/boards/mach-kfr2r09/setup.c

So I suppose your issue comes from this file?

However, mtd.h is included by physmap.h, itself included by
mach-kfr2r09/setup.c after onenand.h; so all this files would be
recompiled anyway when touching mtd.h.

From what I have seen, mach-kfr2r09/setup.c has no reason to include
onenand.h, so I would rather prefer to remove the inclusion.

Thanks,
Miquèl

\
 
 \ /
  Last update: 2018-09-05 10:00    [W:0.041 / U:5.708 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site