lkml.org 
[lkml]   [2018]   [Sep]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] ASoC: tlv320aic31xx: Remove regulator notification handling
On Tue, Sep 04, 2018 at 09:50:50AM -0500, Andrew F. Davis wrote:
> On 09/03/2018 06:30 AM, Mark Brown wrote:
> > On Fri, Aug 31, 2018 at 01:17:37PM -0500, Andrew F. Davis wrote:
> >> The notification handler sets the reset line but never re-enables it
> >> as no one is listening for an enable event, this is certainly broken
> >> and was most likely just copied from other CODECs, remove this code.

> > Why not fix it? The usual pattern would be to take the CODEC out of
> > reset when bringing the bias back to standby.

> The only time this code gets called outside of the normal power on/off
> path is regulator_force_disable(). And the enable event is only called
> inside regulator_enable() which would already be part of the normal
> power up path.

It's there to save us having to rewrite the register cache if we asked
for the device to be powered down but that didn't actually happen due to
other constraints, we know all the registers are still as we left them.
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2018-09-04 16:58    [W:0.043 / U:4.868 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site