[lkml]   [2018]   [Sep]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH] ASoC: tlv320aic31xx: Add MICBIAS off setting
On 09/04/2018 09:41 AM, Mark Brown wrote:
> On Tue, Sep 04, 2018 at 08:55:06AM -0500, Andrew F. Davis wrote:
>> On 09/03/2018 06:26 AM, Mark Brown wrote:
>>> If we really want to pay attention to something setting this up we'd
>>> need to completely remove the widget - what the code is doing at the
>>> minute is setting the voltage that the bias will go to when enabled,
>>> there's still a widget for turning it on and off. There's some chance
>>> that this will break existing boards.
>> Turning on bias is controlled separately, automatically in user-space in
>> many cases, not based on the board. The DT needs to have a way to state
>> that 0v is the needed bias on this board, without this you can not set
>> 0v bias and 2v is chosen by default (which is IMHO should be 0v but that
>> would change existing behavior so I won't touch that).
> Surely turning on MICBIAS at 0V is equivalent to leaving the bias off?

It is, but DT doesn't control when or why MICBIAS is turned on or off,
only what voltage on should be.

 \ /
  Last update: 2018-09-04 16:44    [W:1.646 / U:12.320 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site