lkml.org 
[lkml]   [2018]   [Sep]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 5/5] serial: sprd: Fix the indentation issue
On 11 August 2018 at 09:34, Baolin Wang <baolin.wang@linaro.org> wrote:
> Make the macros' definition and code have the same correct indentation.
>
> Signed-off-by: Baolin Wang <baolin.wang@linaro.org>

Acked-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>

> ---
> drivers/tty/serial/sprd_serial.c | 46 +++++++++++++++++++---------------------
> 1 file changed, 22 insertions(+), 24 deletions(-)
>
> diff --git a/drivers/tty/serial/sprd_serial.c b/drivers/tty/serial/sprd_serial.c
> index 8d5c9cd..4287ca3 100644
> --- a/drivers/tty/serial/sprd_serial.c
> +++ b/drivers/tty/serial/sprd_serial.c
> @@ -68,24 +68,24 @@
> #define SPRD_LCR_DATA_LEN6 0x4
> #define SPRD_LCR_DATA_LEN7 0x8
> #define SPRD_LCR_DATA_LEN8 0xc
> -#define SPRD_LCR_PARITY (BIT(0) | BIT(1))
> +#define SPRD_LCR_PARITY (BIT(0) | BIT(1))
> #define SPRD_LCR_PARITY_EN 0x2
> #define SPRD_LCR_EVEN_PAR 0x0
> #define SPRD_LCR_ODD_PAR 0x1
>
> /* control register 1 */
> -#define SPRD_CTL1 0x001C
> +#define SPRD_CTL1 0x001C
> #define RX_HW_FLOW_CTL_THLD BIT(6)
> #define RX_HW_FLOW_CTL_EN BIT(7)
> #define TX_HW_FLOW_CTL_EN BIT(8)
> #define RX_TOUT_THLD_DEF 0x3E00
> -#define RX_HFC_THLD_DEF 0x40
> +#define RX_HFC_THLD_DEF 0x40
>
> /* fifo threshold register */
> #define SPRD_CTL2 0x0020
> -#define THLD_TX_EMPTY 0x40
> +#define THLD_TX_EMPTY 0x40
> #define THLD_TX_EMPTY_SHIFT 8
> -#define THLD_RX_FULL 0x40
> +#define THLD_RX_FULL 0x40
>
> /* config baud rate register */
> #define SPRD_CLKD0 0x0024
> @@ -95,11 +95,11 @@
> #define SPRD_CLKD1_SHIFT 16
>
> /* interrupt mask status register */
> -#define SPRD_IMSR 0x002C
> -#define SPRD_IMSR_RX_FIFO_FULL BIT(0)
> +#define SPRD_IMSR 0x002C
> +#define SPRD_IMSR_RX_FIFO_FULL BIT(0)
> #define SPRD_IMSR_TX_FIFO_EMPTY BIT(1)
> -#define SPRD_IMSR_BREAK_DETECT BIT(7)
> -#define SPRD_IMSR_TIMEOUT BIT(13)
> +#define SPRD_IMSR_BREAK_DETECT BIT(7)
> +#define SPRD_IMSR_TIMEOUT BIT(13)
>
> struct sprd_uart_port {
> struct uart_port port;
> @@ -229,7 +229,7 @@ static inline void sprd_rx(struct uart_port *port)
> port->icount.rx++;
>
> if (lsr & (SPRD_LSR_BI | SPRD_LSR_PE |
> - SPRD_LSR_FE | SPRD_LSR_OE))
> + SPRD_LSR_FE | SPRD_LSR_OE))
> if (handle_lsr_errors(port, &lsr, &flag))
> continue;
> if (uart_handle_sysrq_char(port, ch))
> @@ -292,8 +292,8 @@ static irqreturn_t sprd_handle_irq(int irq, void *dev_id)
> if (ims & SPRD_IMSR_TIMEOUT)
> serial_out(port, SPRD_ICLR, SPRD_ICLR_TIMEOUT);
>
> - if (ims & (SPRD_IMSR_RX_FIFO_FULL |
> - SPRD_IMSR_BREAK_DETECT | SPRD_IMSR_TIMEOUT))
> + if (ims & (SPRD_IMSR_RX_FIFO_FULL | SPRD_IMSR_BREAK_DETECT |
> + SPRD_IMSR_TIMEOUT))
> sprd_rx(port);
>
> if (ims & SPRD_IMSR_TX_FIFO_EMPTY)
> @@ -333,7 +333,7 @@ static int sprd_startup(struct uart_port *port)
> sp = container_of(port, struct sprd_uart_port, port);
> snprintf(sp->name, sizeof(sp->name), "sprd_serial%d", port->line);
> ret = devm_request_irq(port->dev, port->irq, sprd_handle_irq,
> - IRQF_SHARED, sp->name, port);
> + IRQF_SHARED, sp->name, port);
> if (ret) {
> dev_err(port->dev, "fail to request serial irq %d, ret=%d\n",
> port->irq, ret);
> @@ -361,8 +361,8 @@ static void sprd_shutdown(struct uart_port *port)
> }
>
> static void sprd_set_termios(struct uart_port *port,
> - struct ktermios *termios,
> - struct ktermios *old)
> + struct ktermios *termios,
> + struct ktermios *old)
> {
> unsigned int baud, quot;
> unsigned int lcr = 0, fc;
> @@ -480,8 +480,7 @@ static void sprd_config_port(struct uart_port *port, int flags)
> port->type = PORT_SPRD;
> }
>
> -static int sprd_verify_port(struct uart_port *port,
> - struct serial_struct *ser)
> +static int sprd_verify_port(struct uart_port *port, struct serial_struct *ser)
> {
> if (ser->type != PORT_SPRD)
> return -EINVAL;
> @@ -531,7 +530,7 @@ static void sprd_console_putchar(struct uart_port *port, int ch)
> }
>
> static void sprd_console_write(struct console *co, const char *s,
> - unsigned int count)
> + unsigned int count)
> {
> struct uart_port *port = &sprd_port[co->index]->port;
> int locked = 1;
> @@ -594,7 +593,7 @@ static void sprd_putc(struct uart_port *port, int c)
> unsigned int timeout = SPRD_TIMEOUT;
>
> while (timeout-- &&
> - !(readl(port->membase + SPRD_LSR) & SPRD_LSR_TX_OVER))
> + !(readl(port->membase + SPRD_LSR) & SPRD_LSR_TX_OVER))
> cpu_relax();
>
> writeb(c, port->membase + SPRD_TXD);
> @@ -607,9 +606,8 @@ static void sprd_early_write(struct console *con, const char *s, unsigned int n)
> uart_console_write(&dev->port, s, n, sprd_putc);
> }
>
> -static int __init sprd_early_console_setup(
> - struct earlycon_device *device,
> - const char *opt)
> +static int __init sprd_early_console_setup(struct earlycon_device *device,
> + const char *opt)
> {
> if (!device->port.membase)
> return -ENODEV;
> @@ -691,8 +689,8 @@ static int sprd_probe(struct platform_device *pdev)
>
> index = sprd_probe_dt_alias(index, &pdev->dev);
>
> - sprd_port[index] = devm_kzalloc(&pdev->dev,
> - sizeof(*sprd_port[index]), GFP_KERNEL);
> + sprd_port[index] = devm_kzalloc(&pdev->dev, sizeof(*sprd_port[index]),
> + GFP_KERNEL);
> if (!sprd_port[index])
> return -ENOMEM;
>
> --
> 1.9.1
>

\
 
 \ /
  Last update: 2018-09-04 08:59    [W:0.059 / U:0.376 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site