lkml.org 
[lkml]   [2018]   [Sep]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 02/18] clk: intel: Add clock driver for Intel MIPS SoCs
From
Date

On 9/1/2018 1:13 AM, Stephen Boyd wrote:
> Quoting Zhu, Yi Xin (2018-08-29 03:34:26)
>>>>>> +}
>>>>>> +
>>>>>> +CLK_OF_DECLARE(intel_grx500_cgu, "intel,grx500-cgu", grx500_clk_init);
>>>>> Any reason a platform driver can't be used instead of CLK_OF_DECLARE()?
>>>> It provides CPU clock which is used in early boot stage.
>>>>
>>> Ok. What is the CPU clock doing in early boot stage? Some sort of timer
>>> frequency? If the driver can be split into two pieces, one to handle the
>>> really early stuff that must be in place to get timers up and running
>>> and the other to register the rest of the clks that aren't critical from
>>> a regular platform driver it would be good. That's preferred model if
>>> something is super critical.
>>>
>> Just to make sure my approach is same as you think.
>>
>> In the driver, there's two clock registrations.
>>
>> - One through CLK_OF_DECLARE for early stage clocks.
>>
>> - The other via platform driver for the non-critical clocks.
> You can use the same DT node for both parts, no need to split the node
> into two and use syscon here.
>
Thank you.

Will use CLK_OF_DECLARE_DRIVER to use the same DT node.


\
 
 \ /
  Last update: 2018-09-03 12:53    [W:0.059 / U:5.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site