lkml.org 
[lkml]   [2018]   [Sep]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] hwmon: (k10temp) Support all Family 15h Model 6xh and Model 7xh processors
From
Date
Guenter Roeck wrote:
> BIOS developer guides refer to Family 15h Models 60h-6fh and Family 15h
> Models 70h-7fh. So far the driver only checked for Modela 60h and 70h.
> However, there are now processors with other model numbers in the same
> family. Example is A10-9620P family 15h model 65h. Follow the developer
> guides and mask the lower 4 bit of the model number to determine the
> registers to use for reading temperatures and temperature limits.
>
> Reported-by: Guglielmo Fanini <g.fanini@gmail.com>
> Cc: Guglielmo Fanini <g.fanini@gmail.com>
> Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Acked-by: Clemens Ladisch <clemens@ladisch.de>

> ---
> drivers/hwmon/k10temp.c | 5 +++--
> 1 file changed, 3 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c
> index bb15d7816a29..2cef0c37ff6f 100644
> --- a/drivers/hwmon/k10temp.c
> +++ b/drivers/hwmon/k10temp.c
> @@ -325,8 +325,9 @@ static int k10temp_probe(struct pci_dev *pdev,
>
> data->pdev = pdev;
>
> - if (boot_cpu_data.x86 == 0x15 && (boot_cpu_data.x86_model == 0x60 ||
> - boot_cpu_data.x86_model == 0x70)) {
> + if (boot_cpu_data.x86 == 0x15 &&
> + ((boot_cpu_data.x86_model & 0xf0) == 0x60 ||
> + (boot_cpu_data.x86_model & 0xf0) == 0x70)) {
> data->read_htcreg = read_htcreg_nb_f15;
> data->read_tempreg = read_tempreg_nb_f15;
> } else if (boot_cpu_data.x86 == 0x17) {

\
 
 \ /
  Last update: 2018-09-03 19:48    [W:0.036 / U:2.360 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site