lkml.org 
[lkml]   [2018]   [Sep]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 07/12] drm/sun4i: sun6i_mipi_dsi: Fix TCON DRQ set bits
On Thu, Sep 27, 2018 at 10:28 PM Maxime Ripard
<maxime.ripard@bootlin.com> wrote:
>
> On Thu, Sep 27, 2018 at 05:18:45PM +0530, Jagan Teki wrote:
> > TCON DRQ set bits for non-burst DSI mode can computed via
> > horizontal front porch instead of front porch + sync timings.
> >
> > Since there no documentation for TCON_DRQ_REG(0x7c) register
> > this change is taken as reference from BPI-M64-bsp.
>
> Detailing more what the issue is would be great.
>
> > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> > ---
> > drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 4 ++--
> > 1 file changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> > index 599284971ab6..9918fdb990ff 100644
> > --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> > +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> > @@ -367,9 +367,9 @@ static void sun6i_dsi_setup_burst(struct sun6i_dsi *dsi,
> > struct mipi_dsi_device *device = dsi->device;
> > u32 val = 0;
>
> The computation here is in the A64 driver:
>
> if ((panel->lcd_ht - panel->lcd_x - panel->lcd_hbp) < 21) {
> dsi_dev[sel]->dsi_tcon_drq.bits.drq_mode = 0;
> } else {
> dsi_dev[sel]->dsi_tcon_drq.bits.drq_set =
> (panel->lcd_ht-panel->lcd_x-panel->lcd_hbp-20) *
> dsi_pixel_bits[panel->lcd_dsi_format]/(8*4);
> }
>
> It is testing that the sync + front porch is smaller than 21, and
> otherwise sets the drq.
>
> > - if ((mode->hsync_end - mode->hdisplay) > 20) {
>
> My code here is testing that the difference between hsync_end and
> hdisplay is superior to 20, and sets the DRQ if true. The condition is
> reversed, but otherwise, that difference is the front porch plus the
> sync length.

True, I understand this, but does drq setting here is specific to SoC?
I thought of finding DRQ in A31 BSP but I couldn't find the code. do
you have bsp somewhere in github?

>
> > + if ((mode->hsync_start - mode->hdisplay) > 20) {
>
> However, you are testing for just the front porch, unlike what your
> commit log is saying, and unlike what allwinner's code is saying. So
> this deserves some explanation.

but A64 is doing this, do you think it's completely A64 specific or
testing panel with front porch drq?

\
 
 \ /
  Last update: 2018-09-27 19:46    [W:0.093 / U:3.308 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site