lkml.org 
[lkml]   [2018]   [Sep]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 06/12] drm/sun4i: sun6i_mipi_dsi: Fix VBP size calculation
On Thu, Sep 27, 2018 at 8:51 PM Maxime Ripard <maxime.ripard@bootlin.com> wrote:
>
> On Thu, Sep 27, 2018 at 05:18:44PM +0530, Jagan Teki wrote:
> > According to horizontal and vertical timings are defined
> > per the diagram from include/drm/drm_modes.h
> >
> > Back porch = [hv]total - [hv]sync_end
> >
> > So, update SUN6I_DSI_BASIC_SIZE0_VBP calculation as
> > mode->vtotal - mode->vsync_end
> >
> > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> > ---
> > drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 4 ++--
> > 1 file changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> > index 1c7e42015645..599284971ab6 100644
> > --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> > +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> > @@ -526,8 +526,8 @@ static void sun6i_dsi_setup_timings(struct sun6i_dsi *dsi,
> > regmap_write(dsi->regs, SUN6I_DSI_BASIC_SIZE0_REG,
> > SUN6I_DSI_BASIC_SIZE0_VSA(mode->vsync_end -
> > mode->vsync_start) |
> > - SUN6I_DSI_BASIC_SIZE0_VBP(mode->vsync_start -
> > - mode->vdisplay));
> > + SUN6I_DSI_BASIC_SIZE0_VBP(mode->vtotal -
> > + mode->vsync_end));
>
> Is it purely theoretical, or did you find some source that back that?

VSA is done as per that, sync_end - sync start would give sync time.
VBP also done in BPI-M64-bsp[1] which results back porch existing code
results fron porch.

[1] https://github.com/BPI-SINOVOIP/BPI-M64-bsp/blob/master/linux-sunxi/drivers/video/sunxi/disp2/disp/de/lowlevel_sun50iw1/de_dsi.c#L955

\
 
 \ /
  Last update: 2018-09-27 18:20    [W:0.090 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site