lkml.org 
[lkml]   [2018]   [Sep]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH v2] staging: mt7621-mmc: Fix single statement macros in sd.c
This patch fixes a few single statement macros in sd.c.
It converts two macros to inline functions. It removes
five other macros and replaces their usages with calls to
the function being called in the macro definition.
Issue found by checkpatch.

Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
---
Changes in v2:
- Convert msdc_gate_clk() and msdc_ungate_clk() to inline functions.
- Delete msdc_irq_restore(), msdc_vcore_on(), msdc_vcore_off(),
msdc_vdd_on() and msdc_vdd_off() and replace their usages directly
with calls to the function being called by these macros.
---
drivers/staging/mt7621-mmc/sd.c | 61 +++++++--------------------------
1 file changed, 13 insertions(+), 48 deletions(-)

diff --git a/drivers/staging/mt7621-mmc/sd.c b/drivers/staging/mt7621-mmc/sd.c
index 7474f9ed7b5b..c36884e33a50 100644
--- a/drivers/staging/mt7621-mmc/sd.c
+++ b/drivers/staging/mt7621-mmc/sd.c
@@ -103,15 +103,15 @@ static int cd_active_low = 1;
#if 0 /* --- by chhung */
/* gate means clock power down */
static int g_clk_gate = 0;
-#define msdc_gate_clock(id) \
- do { \
- g_clk_gate &= ~(1 << ((id) + PERI_MSDC0_PDN)); \
- } while (0)
+static inline void msdc_gate_clock(int id)
+{
+ g_clk_gate &= ~(1 << ((id) + PERI_MSDC0_PDN));
+}
/* not like power down register. 1 means clock on. */
-#define msdc_ungate_clock(id) \
- do { \
- g_clk_gate |= 1 << ((id) + PERI_MSDC0_PDN); \
- } while (0)
+static inline void msdc_ungate_clock(int id)
+{
+ g_clk_gate |= 1 << ((id) + PERI_MSDC0_PDN);
+}

// do we need sync object or not
void msdc_clk_status(int *status)
@@ -169,11 +169,6 @@ static void msdc_clr_fifo(struct msdc_host *host)
sdr_clr_bits(host->base + MSDC_INTEN, val); \
} while (0)

-#define msdc_irq_restore(val) \
- do { \
- sdr_set_bits(host->base + MSDC_INTEN, val); \
- } while (0)
-
/* clock source for host: global */
#if defined(CONFIG_SOC_MT7620)
static u32 hclks[] = {48000000}; /* +/- by chhung */
@@ -181,32 +176,6 @@ static u32 hclks[] = {48000000}; /* +/- by chhung */
static u32 hclks[] = {50000000}; /* +/- by chhung */
#endif

-//============================================
-// the power for msdc host controller: global
-// always keep the VMC on.
-//============================================
-#define msdc_vcore_on(host) \
- do { \
- (void)hwPowerOn(MT65XX_POWER_LDO_VMC, VOL_3300, "SD"); \
- } while (0)
-#define msdc_vcore_off(host) \
- do { \
- (void)hwPowerDown(MT65XX_POWER_LDO_VMC, "SD"); \
- } while (0)
-
-//====================================
-// the vdd output for card: global
-// always keep the VMCH on.
-//====================================
-#define msdc_vdd_on(host) \
- do { \
- (void)hwPowerOn(MT65XX_POWER_LDO_VMCH, VOL_3300, "SD"); \
- } while (0)
-#define msdc_vdd_off(host) \
- do { \
- (void)hwPowerDown(MT65XX_POWER_LDO_VMCH, "SD"); \
- } while (0)
-
#define sdc_is_busy() (readl(host->base + SDC_STS) & SDC_STS_SDCBUSY)
#define sdc_is_cmd_busy() (readl(host->base + SDC_STS) & SDC_STS_CMDBUSY)

@@ -364,7 +333,7 @@ static void msdc_set_mclk(struct msdc_host *host, int ddr, unsigned int hz)
host->mclk = hz;
msdc_set_timeout(host, host->timeout_ns, host->timeout_clks); // need?

- msdc_irq_restore(flags);
+ sdr_set_bits(host->base + MSDC_INTEN, flags);
}

/* Fix me. when need to abort */
@@ -453,11 +422,11 @@ void msdc_pin_reset(struct msdc_host *host, int mode)
static void msdc_core_power(struct msdc_host *host, int on)
{
if (on && host->core_power == 0) {
- msdc_vcore_on(host);
+ (void)hwPowerOn(MT65XX_POWER_LDO_VMC, VOL_3300, "SD");
host->core_power = 1;
msleep(1);
} else if (!on && host->core_power == 1) {
- msdc_vcore_off(host);
+ (void)hwPowerDown(MT65XX_POWER_LDO_VMC, "SD");
host->core_power = 0;
msleep(1);
}
@@ -478,10 +447,8 @@ static void msdc_card_power(struct msdc_host *host, int on)
{
if (on) {
msdc_pin_config(host, MSDC_PIN_PULL_UP);
- //msdc_vdd_on(host); // need todo card detection.
msleep(1);
} else {
- //msdc_vdd_off(host);
msdc_pin_config(host, MSDC_PIN_PULL_DOWN);
msleep(1);
}
@@ -1750,7 +1717,6 @@ static void msdc_enable_cd_irq(struct msdc_host *host, int enable)
* shouldn't be turned off. Here adds a reference count to keep
* the core power alive.
*/
- //msdc_vcore_on(host); //did in msdc_init_hw()

if (hw->config_gpio_pin) /* NULL */
hw->config_gpio_pin(MSDC_CD_PIN, GPIO_PULL_UP);
@@ -1773,7 +1739,6 @@ static void msdc_enable_cd_irq(struct msdc_host *host, int enable)
/* Here decreases a reference count to core power since card
* detection circuit is shutdown.
*/
- //msdc_vcore_off(host);
}
}

@@ -1783,11 +1748,11 @@ static void msdc_init_hw(struct msdc_host *host)

/* Power on */
#if 0 /* --- by chhung */
- msdc_vcore_on(host);
+ (void)hwPowerOn(MT65XX_POWER_LDO_VMC, VOL_3300, "SD");
msdc_pin_reset(host, MSDC_PIN_PULL_UP);
msdc_select_clksrc(host, hw->clk_src);
enable_clock(PERI_MSDC0_PDN + host->id, "SD");
- msdc_vdd_on(host);
+ (void)hwPowerOn(MT65XX_POWER_LDO_VMCH, VOL_3300, "SD");
#endif /* end of --- */
/* Configure to MMC/SD mode */
sdr_set_field(host->base + MSDC_CFG, MSDC_CFG_MODE, MSDC_SDMMC);
--
2.17.1
\
 
 \ /
  Last update: 2018-09-23 11:39    [W:0.081 / U:1.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site