lkml.org 
[lkml]   [2018]   [Sep]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 06/11] arm: dts: hip04: Update coresight bindings for hardware ports
From
Date
Hi Suzuki,

On 2018/9/12 14:53, Suzuki K Poulose wrote:
> Switch to the new the hardware port bindings.
>
> Cc: Wei Xu <xuwei5@hisilicon.com>
> Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>

Thanks!
Applied to the hisilicon dt tree.

Best Regards,
Wei

> ---
> arch/arm/boot/dts/hip04.dtsi | 346 ++++++++++++++++++-----------------
> 1 file changed, 176 insertions(+), 170 deletions(-)
>
> diff --git a/arch/arm/boot/dts/hip04.dtsi b/arch/arm/boot/dts/hip04.dtsi
> index 44044f275115..0f917b272ff3 100644
> --- a/arch/arm/boot/dts/hip04.dtsi
> +++ b/arch/arm/boot/dts/hip04.dtsi
> @@ -277,10 +277,11 @@
>
> clocks = <&clk_375m>;
> clock-names = "apb_pclk";
> - port {
> - etb0_in_port: endpoint@0 {
> - slave-mode;
> - remote-endpoint = <&replicator0_out_port0>;
> + in-ports {
> + port {
> + etb0_in_port: endpoint@0 {
> + remote-endpoint = <&replicator0_out_port0>;
> + };
> };
> };
> };
> @@ -291,10 +292,11 @@
>
> clocks = <&clk_375m>;
> clock-names = "apb_pclk";
> - port {
> - etb1_in_port: endpoint@0 {
> - slave-mode;
> - remote-endpoint = <&replicator1_out_port0>;
> + in-ports {
> + port {
> + etb1_in_port: endpoint@0 {
> + remote-endpoint = <&replicator1_out_port0>;
> + };
> };
> };
> };
> @@ -305,10 +307,11 @@
>
> clocks = <&clk_375m>;
> clock-names = "apb_pclk";
> - port {
> - etb2_in_port: endpoint@0 {
> - slave-mode;
> - remote-endpoint = <&replicator2_out_port0>;
> + in-ports {
> + port {
> + etb2_in_port: endpoint@0 {
> + remote-endpoint = <&replicator2_out_port0>;
> + };
> };
> };
> };
> @@ -319,10 +322,11 @@
>
> clocks = <&clk_375m>;
> clock-names = "apb_pclk";
> - port {
> - etb3_in_port: endpoint@0 {
> - slave-mode;
> - remote-endpoint = <&replicator3_out_port0>;
> + in-ports {
> + port {
> + etb3_in_port: endpoint@0 {
> + remote-endpoint = <&replicator3_out_port0>;
> + };
> };
> };
> };
> @@ -333,10 +337,11 @@
>
> clocks = <&clk_375m>;
> clock-names = "apb_pclk";
> - port {
> - tpiu_in_port: endpoint@0 {
> - slave-mode;
> - remote-endpoint = <&funnel4_out_port0>;
> + in-ports {
> + port {
> + tpiu_in_port: endpoint@0 {
> + remote-endpoint = <&funnel4_out_port0>;
> + };
> };
> };
> };
> @@ -347,7 +352,7 @@
> */
> compatible = "arm,coresight-replicator";
>
> - ports {
> + out-ports {
> #address-cells = <1>;
> #size-cells = <0>;
>
> @@ -365,12 +370,11 @@
> remote-endpoint = <&funnel4_in_port0>;
> };
> };
> + };
>
> - /* replicator input port */
> - port@2 {
> - reg = <0>;
> + in-ports {
> + port {
> replicator0_in_port0: endpoint {
> - slave-mode;
> remote-endpoint = <&funnel0_out_port0>;
> };
> };
> @@ -383,7 +387,7 @@
> */
> compatible = "arm,coresight-replicator";
>
> - ports {
> + out-ports {
> #address-cells = <1>;
> #size-cells = <0>;
>
> @@ -401,12 +405,11 @@
> remote-endpoint = <&funnel4_in_port1>;
> };
> };
> + };
>
> - /* replicator input port */
> - port@2 {
> - reg = <0>;
> + in-ports {
> + port {
> replicator1_in_port0: endpoint {
> - slave-mode;
> remote-endpoint = <&funnel1_out_port0>;
> };
> };
> @@ -419,11 +422,10 @@
> */
> compatible = "arm,coresight-replicator";
>
> - ports {
> + out-ports {
> #address-cells = <1>;
> #size-cells = <0>;
>
> - /* replicator output ports */
> port@0 {
> reg = <0>;
> replicator2_out_port0: endpoint {
> @@ -437,12 +439,11 @@
> remote-endpoint = <&funnel4_in_port2>;
> };
> };
> + };
>
> - /* replicator input port */
> - port@2 {
> - reg = <0>;
> + in-ports {
> + port {
> replicator2_in_port0: endpoint {
> - slave-mode;
> remote-endpoint = <&funnel2_out_port0>;
> };
> };
> @@ -455,11 +456,10 @@
> */
> compatible = "arm,coresight-replicator";
>
> - ports {
> + out-ports {
> #address-cells = <1>;
> #size-cells = <0>;
>
> - /* replicator output ports */
> port@0 {
> reg = <0>;
> replicator3_out_port0: endpoint {
> @@ -473,12 +473,11 @@
> remote-endpoint = <&funnel4_in_port3>;
> };
> };
> + };
>
> - /* replicator input port */
> - port@2 {
> - reg = <0>;
> + in-ports {
> + port {
> replicator3_in_port0: endpoint {
> - slave-mode;
> remote-endpoint = <&funnel3_out_port0>;
> };
> };
> @@ -491,48 +490,43 @@
>
> clocks = <&clk_375m>;
> clock-names = "apb_pclk";
> - ports {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - /* funnel output port */
> - port@0 {
> - reg = <0>;
> + out-ports {
> + port {
> funnel0_out_port0: endpoint {
> remote-endpoint =
> <&replicator0_in_port0>;
> };
> };
> + };
>
> - /* funnel input ports */
> - port@1 {
> + in-ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> reg = <0>;
> funnel0_in_port0: endpoint {
> - slave-mode;
> remote-endpoint = <&ptm0_out_port>;
> };
> };
>
> - port@2 {
> + port@1 {
> reg = <1>;
> funnel0_in_port1: endpoint {
> - slave-mode;
> remote-endpoint = <&ptm1_out_port>;
> };
> };
>
> - port@3 {
> + port@2 {
> reg = <2>;
> funnel0_in_port2: endpoint {
> - slave-mode;
> remote-endpoint = <&ptm2_out_port>;
> };
> };
>
> - port@4 {
> + port@3 {
> reg = <3>;
> funnel0_in_port3: endpoint {
> - slave-mode;
> remote-endpoint = <&ptm3_out_port>;
> };
> };
> @@ -545,48 +539,43 @@
>
> clocks = <&clk_375m>;
> clock-names = "apb_pclk";
> - ports {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - /* funnel output port */
> - port@0 {
> - reg = <0>;
> + out-ports {
> + port {
> funnel1_out_port0: endpoint {
> remote-endpoint =
> <&replicator1_in_port0>;
> };
> };
> + };
>
> - /* funnel input ports */
> - port@1 {
> + in-ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> reg = <0>;
> funnel1_in_port0: endpoint {
> - slave-mode;
> remote-endpoint = <&ptm4_out_port>;
> };
> };
>
> - port@2 {
> + port@1 {
> reg = <1>;
> funnel1_in_port1: endpoint {
> - slave-mode;
> remote-endpoint = <&ptm5_out_port>;
> };
> };
>
> - port@3 {
> + port@2 {
> reg = <2>;
> funnel1_in_port2: endpoint {
> - slave-mode;
> remote-endpoint = <&ptm6_out_port>;
> };
> };
>
> - port@4 {
> + port@3 {
> reg = <3>;
> funnel1_in_port3: endpoint {
> - slave-mode;
> remote-endpoint = <&ptm7_out_port>;
> };
> };
> @@ -599,48 +588,43 @@
>
> clocks = <&clk_375m>;
> clock-names = "apb_pclk";
> - ports {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - /* funnel output port */
> - port@0 {
> - reg = <0>;
> + out-ports {
> + port {
> funnel2_out_port0: endpoint {
> remote-endpoint =
> <&replicator2_in_port0>;
> };
> };
> + };
>
> - /* funnel input ports */
> - port@1 {
> + in-ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> reg = <0>;
> funnel2_in_port0: endpoint {
> - slave-mode;
> remote-endpoint = <&ptm8_out_port>;
> };
> };
>
> - port@2 {
> + port@1 {
> reg = <1>;
> funnel2_in_port1: endpoint {
> - slave-mode;
> remote-endpoint = <&ptm9_out_port>;
> };
> };
>
> - port@3 {
> + port@2 {
> reg = <2>;
> funnel2_in_port2: endpoint {
> - slave-mode;
> remote-endpoint = <&ptm10_out_port>;
> };
> };
>
> - port@4 {
> + port@3 {
> reg = <3>;
> funnel2_in_port3: endpoint {
> - slave-mode;
> remote-endpoint = <&ptm11_out_port>;
> };
> };
> @@ -653,48 +637,43 @@
>
> clocks = <&clk_375m>;
> clock-names = "apb_pclk";
> - ports {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - /* funnel output port */
> - port@0 {
> - reg = <0>;
> + out-ports {
> + port {
> funnel3_out_port0: endpoint {
> remote-endpoint =
> <&replicator3_in_port0>;
> };
> };
> + };
>
> - /* funnel input ports */
> - port@1 {
> + in-ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> reg = <0>;
> funnel3_in_port0: endpoint {
> - slave-mode;
> remote-endpoint = <&ptm12_out_port>;
> };
> };
>
> - port@2 {
> + port@1 {
> reg = <1>;
> funnel3_in_port1: endpoint {
> - slave-mode;
> remote-endpoint = <&ptm13_out_port>;
> };
> };
>
> - port@3 {
> + port@2 {
> reg = <2>;
> funnel3_in_port2: endpoint {
> - slave-mode;
> remote-endpoint = <&ptm14_out_port>;
> };
> };
>
> - port@4 {
> + port@3 {
> reg = <3>;
> funnel3_in_port3: endpoint {
> - slave-mode;
> remote-endpoint = <&ptm15_out_port>;
> };
> };
> @@ -707,50 +686,45 @@
>
> clocks = <&clk_375m>;
> clock-names = "apb_pclk";
> - ports {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - /* funnel output port */
> - port@0 {
> - reg = <0>;
> + out-ports {
> + port {
> funnel4_out_port0: endpoint {
> remote-endpoint = <&tpiu_in_port>;
> };
> };
> + };
>
> - /* funnel input ports */
> - port@1 {
> + in-ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> reg = <0>;
> funnel4_in_port0: endpoint {
> - slave-mode;
> remote-endpoint =
> <&replicator0_out_port1>;
> };
> };
>
> - port@2 {
> + port@1 {
> reg = <1>;
> funnel4_in_port1: endpoint {
> - slave-mode;
> remote-endpoint =
> <&replicator1_out_port1>;
> };
> };
>
> - port@3 {
> + port@2 {
> reg = <2>;
> funnel4_in_port2: endpoint {
> - slave-mode;
> remote-endpoint =
> <&replicator2_out_port1>;
> };
> };
>
> - port@4 {
> + port@3 {
> reg = <3>;
> funnel4_in_port3: endpoint {
> - slave-mode;
> remote-endpoint =
> <&replicator3_out_port1>;
> };
> @@ -765,9 +739,11 @@
> clocks = <&clk_375m>;
> clock-names = "apb_pclk";
> cpu = <&CPU0>;
> - port {
> - ptm0_out_port: endpoint {
> - remote-endpoint = <&funnel0_in_port0>;
> + out-ports {
> + port {
> + ptm0_out_port: endpoint {
> + remote-endpoint = <&funnel0_in_port0>;
> + };
> };
> };
> };
> @@ -779,9 +755,11 @@
> clocks = <&clk_375m>;
> clock-names = "apb_pclk";
> cpu = <&CPU1>;
> - port {
> - ptm1_out_port: endpoint {
> - remote-endpoint = <&funnel0_in_port1>;
> + out-ports {
> + port {
> + ptm1_out_port: endpoint {
> + remote-endpoint = <&funnel0_in_port1>;
> + };
> };
> };
> };
> @@ -793,9 +771,11 @@
> clocks = <&clk_375m>;
> clock-names = "apb_pclk";
> cpu = <&CPU2>;
> - port {
> - ptm2_out_port: endpoint {
> - remote-endpoint = <&funnel0_in_port2>;
> + out-ports {
> + port {
> + ptm2_out_port: endpoint {
> + remote-endpoint = <&funnel0_in_port2>;
> + };
> };
> };
> };
> @@ -807,9 +787,11 @@
> clocks = <&clk_375m>;
> clock-names = "apb_pclk";
> cpu = <&CPU3>;
> - port {
> - ptm3_out_port: endpoint {
> - remote-endpoint = <&funnel0_in_port3>;
> + out-ports {
> + port {
> + ptm3_out_port: endpoint {
> + remote-endpoint = <&funnel0_in_port3>;
> + };
> };
> };
> };
> @@ -821,9 +803,11 @@
> clocks = <&clk_375m>;
> clock-names = "apb_pclk";
> cpu = <&CPU4>;
> - port {
> - ptm4_out_port: endpoint {
> - remote-endpoint = <&funnel1_in_port0>;
> + out-ports {
> + port {
> + ptm4_out_port: endpoint {
> + remote-endpoint = <&funnel1_in_port0>;
> + };
> };
> };
> };
> @@ -835,9 +819,11 @@
> clocks = <&clk_375m>;
> clock-names = "apb_pclk";
> cpu = <&CPU5>;
> - port {
> - ptm5_out_port: endpoint {
> - remote-endpoint = <&funnel1_in_port1>;
> + out-ports {
> + port {
> + ptm5_out_port: endpoint {
> + remote-endpoint = <&funnel1_in_port1>;
> + };
> };
> };
> };
> @@ -849,9 +835,11 @@
> clocks = <&clk_375m>;
> clock-names = "apb_pclk";
> cpu = <&CPU6>;
> - port {
> - ptm6_out_port: endpoint {
> - remote-endpoint = <&funnel1_in_port2>;
> + out-ports {
> + port {
> + ptm6_out_port: endpoint {
> + remote-endpoint = <&funnel1_in_port2>;
> + };
> };
> };
> };
> @@ -863,9 +851,11 @@
> clocks = <&clk_375m>;
> clock-names = "apb_pclk";
> cpu = <&CPU7>;
> - port {
> - ptm7_out_port: endpoint {
> - remote-endpoint = <&funnel1_in_port3>;
> + out-ports {
> + port {
> + ptm7_out_port: endpoint {
> + remote-endpoint = <&funnel1_in_port3>;
> + };
> };
> };
> };
> @@ -877,9 +867,11 @@
> clocks = <&clk_375m>;
> clock-names = "apb_pclk";
> cpu = <&CPU8>;
> - port {
> - ptm8_out_port: endpoint {
> - remote-endpoint = <&funnel2_in_port0>;
> + out-ports {
> + port {
> + ptm8_out_port: endpoint {
> + remote-endpoint = <&funnel2_in_port0>;
> + };
> };
> };
> };
> @@ -890,9 +882,11 @@
> clocks = <&clk_375m>;
> clock-names = "apb_pclk";
> cpu = <&CPU9>;
> - port {
> - ptm9_out_port: endpoint {
> - remote-endpoint = <&funnel2_in_port1>;
> + out-ports {
> + port {
> + ptm9_out_port: endpoint {
> + remote-endpoint = <&funnel2_in_port1>;
> + };
> };
> };
> };
> @@ -904,9 +898,11 @@
> clocks = <&clk_375m>;
> clock-names = "apb_pclk";
> cpu = <&CPU10>;
> - port {
> - ptm10_out_port: endpoint {
> - remote-endpoint = <&funnel2_in_port2>;
> + out-ports {
> + port {
> + ptm10_out_port: endpoint {
> + remote-endpoint = <&funnel2_in_port2>;
> + };
> };
> };
> };
> @@ -918,9 +914,11 @@
> clocks = <&clk_375m>;
> clock-names = "apb_pclk";
> cpu = <&CPU11>;
> - port {
> - ptm11_out_port: endpoint {
> - remote-endpoint = <&funnel2_in_port3>;
> + out-ports {
> + port {
> + ptm11_out_port: endpoint {
> + remote-endpoint = <&funnel2_in_port3>;
> + };
> };
> };
> };
> @@ -932,9 +930,11 @@
> clocks = <&clk_375m>;
> clock-names = "apb_pclk";
> cpu = <&CPU12>;
> - port {
> - ptm12_out_port: endpoint {
> - remote-endpoint = <&funnel3_in_port0>;
> + out-ports {
> + port {
> + ptm12_out_port: endpoint {
> + remote-endpoint = <&funnel3_in_port0>;
> + };
> };
> };
> };
> @@ -946,9 +946,11 @@
> clocks = <&clk_375m>;
> clock-names = "apb_pclk";
> cpu = <&CPU13>;
> - port {
> - ptm13_out_port: endpoint {
> - remote-endpoint = <&funnel3_in_port1>;
> + out-ports {
> + port {
> + ptm13_out_port: endpoint {
> + remote-endpoint = <&funnel3_in_port1>;
> + };
> };
> };
> };
> @@ -960,9 +962,11 @@
> clocks = <&clk_375m>;
> clock-names = "apb_pclk";
> cpu = <&CPU14>;
> - port {
> - ptm14_out_port: endpoint {
> - remote-endpoint = <&funnel3_in_port2>;
> + out-ports {
> + port {
> + ptm14_out_port: endpoint {
> + remote-endpoint = <&funnel3_in_port2>;
> + };
> };
> };
> };
> @@ -974,9 +978,11 @@
> clocks = <&clk_375m>;
> clock-names = "apb_pclk";
> cpu = <&CPU15>;
> - port {
> - ptm15_out_port: endpoint {
> - remote-endpoint = <&funnel3_in_port3>;
> + out-ports {
> + port {
> + ptm15_out_port: endpoint {
> + remote-endpoint = <&funnel3_in_port3>;
> + };
> };
> };
> };
>

\
 
 \ /
  Last update: 2018-09-21 16:07    [W:0.332 / U:1.976 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site