lkml.org 
[lkml]   [2018]   [Sep]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 22/27] drm/sun4i: Initialize registers in tcon-top driver
Date
It turns out that TCON TOP registers in H6 SoC have non-zero reset
value. This may cause issues if bits are not changed during
configuration.

To prevent that, initialize registers to 0.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
---
drivers/gpu/drm/sun4i/sun8i_tcon_top.c | 7 +++++++
1 file changed, 7 insertions(+)

diff --git a/drivers/gpu/drm/sun4i/sun8i_tcon_top.c b/drivers/gpu/drm/sun4i/sun8i_tcon_top.c
index 3040a79f298f..37158548b447 100644
--- a/drivers/gpu/drm/sun4i/sun8i_tcon_top.c
+++ b/drivers/gpu/drm/sun4i/sun8i_tcon_top.c
@@ -167,6 +167,13 @@ static int sun8i_tcon_top_bind(struct device *dev, struct device *master,
goto err_assert_reset;
}

+ /*
+ * At least on H6, some registers have some bits set by default
+ * which may cause issues. Clear them here.
+ */
+ writel(0, regs + TCON_TOP_PORT_SEL_REG);
+ writel(0, regs + TCON_TOP_GATE_SRC_REG);
+
/*
* TCON TOP has two muxes, which select parent clock for each TCON TV
* channel clock. Parent could be either TCON TV or TVE clock. For now
--
2.18.0
\
 
 \ /
  Last update: 2018-09-02 09:29    [W:0.265 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site