lkml.org 
[lkml]   [2018]   [Sep]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH AUTOSEL 4.18 066/131] ath10k: disable bundle mgmt tx completion event support
Date
From: Surabhi Vishnoi <svishnoi@codeaurora.org>

[ Upstream commit 673bc519c55843c68c3aecff71a4101e79d28d2b ]

The tx completion of multiple mgmt frames can be bundled
in a single event and sent by the firmware to host, if this
capability is not disabled explicitly by the host. If the host
cannot handle the bundled mgmt tx completion, this capability
support needs to be disabled in the wmi init cmd, sent to the firmware.

Add the host capability indication flag in the wmi ready command,
to let firmware know the features supported by the host driver.
This field is ignored if it is not supported by firmware.

Set the host capability indication flag(i.e. host_capab) to zero,
for disabling the support of bundle mgmt tx completion. This will
indicate the firmware to send completion event for every mgmt tx
completion, instead of bundling them together and sending in a single
event.

Tested HW: WCN3990
Tested FW: WLAN.HL.2.0-01188-QCAHLSWMTPLZ-1

Signed-off-by: Surabhi Vishnoi <svishnoi@codeaurora.org>
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
drivers/net/wireless/ath/ath10k/wmi-tlv.c | 5 +++++
drivers/net/wireless/ath/ath10k/wmi-tlv.h | 5 +++++
2 files changed, 10 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index 8c49a26fc571..21eb3a598a86 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -1584,6 +1584,11 @@ static struct sk_buff *ath10k_wmi_tlv_op_gen_init(struct ath10k *ar)
cfg->keep_alive_pattern_size = __cpu_to_le32(0);
cfg->max_tdls_concurrent_sleep_sta = __cpu_to_le32(1);
cfg->max_tdls_concurrent_buffer_sta = __cpu_to_le32(1);
+ cfg->wmi_send_separate = __cpu_to_le32(0);
+ cfg->num_ocb_vdevs = __cpu_to_le32(0);
+ cfg->num_ocb_channels = __cpu_to_le32(0);
+ cfg->num_ocb_schedules = __cpu_to_le32(0);
+ cfg->host_capab = __cpu_to_le32(0);

ath10k_wmi_put_host_mem_chunks(ar, chunks);

diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.h b/drivers/net/wireless/ath/ath10k/wmi-tlv.h
index 3e1e340cd834..1cb93d09b8a9 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.h
@@ -1670,6 +1670,11 @@ struct wmi_tlv_resource_config {
__le32 keep_alive_pattern_size;
__le32 max_tdls_concurrent_sleep_sta;
__le32 max_tdls_concurrent_buffer_sta;
+ __le32 wmi_send_separate;
+ __le32 num_ocb_vdevs;
+ __le32 num_ocb_channels;
+ __le32 num_ocb_schedules;
+ __le32 host_capab;
} __packed;

struct wmi_tlv_init_cmd {
--
2.17.1
\
 
 \ /
  Last update: 2018-09-02 15:32    [W:0.536 / U:0.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site