lkml.org 
[lkml]   [2018]   [Sep]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH RFC 0/2] hwmon: Add RPi PoE HAT fan driver
Date
This series is an early stage of the hwmon driver for the fan on the
Raspberry Pi Power over Ethernet HAT [1]. At the end this should use a
Device Tree Overlay.

Changes by Stefan based on [2]:
- reformat the downstream patches for submission
- drop reboot notification
- fix remaining checkpatch issues
- add COMPILE_TEST to Kconfig

The driver is mostly copy & paste from pwm-fan, which isn't good. Personally
i see two options:

1) integrate the driver function into the pwm-fan driver (new compatible)
2) implement the core function as a PWM driver and use the pwm-fan driver on top

[1] - https://www.raspberrypi.org/products/poe-hat/
[2] - https://github.com/raspberrypi/linux/commit/0f937c8dc3201ebffa6c617c616fd7c65db65959

Serge Schneider (2):
dt-bindings: hwmon: Add RPi PoE HAT documentation
hwmon: Add RPi PoE HAT fan driver

.../devicetree/bindings/hwmon/rpi-poe-fan.txt | 55 +++
Documentation/hwmon/rpi-poe-fan | 15 +
drivers/hwmon/Kconfig | 11 +
drivers/hwmon/Makefile | 1 +
drivers/hwmon/rpi-poe-fan.c | 414 +++++++++++++++++++++
include/soc/bcm2835/raspberrypi-firmware.h | 2 +
6 files changed, 498 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hwmon/rpi-poe-fan.txt
create mode 100644 Documentation/hwmon/rpi-poe-fan
create mode 100644 drivers/hwmon/rpi-poe-fan.c

--
2.7.4

\
 
 \ /
  Last update: 2018-09-02 13:23    [W:0.063 / U:0.456 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site