lkml.org 
[lkml]   [2018]   [Sep]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRe: [PATCH 18/21] arm64: dts: ls104xa: set mask to drop TBU ID from StreamID
Date
Hi Robin,

On 19.09.2018 16:41, Robin Murphy wrote:
> On 19/09/18 13:36, laurentiu.tudor@nxp.com wrote:
>> From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
>>
>> The StreamID entering the SMMU is actually a concatenation of the
>> SMMU TBU ID and the ICID configured in software.
>> Since the TBU ID is internal to the SoC and since we want that the
>> actual the ICID configured in software to enter the SMMU witout any
>> additional set bits, mask out the TBU ID bits and leave only the
>> relevant ICID bits to enter SMMU.
>>
>> Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
>> ---
>>   arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 1 +
>>   arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 1 +
>>   2 files changed, 2 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
>> b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
>> index 8b3eba167508..90296b9fb171 100644
>> --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
>> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
>> @@ -226,6 +226,7 @@
>>               compatible = "arm,mmu-500";
>>               reg = <0 0x9000000 0 0x400000>;
>>               dma-coherent;
>> +            stream-match-mask = <0x7f00>;
>
> The TBU ID only forms the top 5 bits, so also ignoring bits 9:8 raises
> an eyebrow - if the LS104x SMMU really is configured for 8-bit SID input
> then it's harmless,

On these lower-end platforms the SID input is configured and documented
as 8-bit.

> but if it's actually a 9 or 10-bit configuration
> then you probably want to avoid masking them (or at least document why)
> - IIRC there *was* stuff wired there on LS2085 at least.

Yes, on LS2s there are 2 extra-bits in there carrying some signaling.
However, on LS1s they are not present.

---
Thanks & Best Regards, Laurentiu

>
>>               #global-interrupts = <2>;
>>               #iommu-cells = <1>;
>>               interrupts = <0 142 4>, /* global secure fault */
>> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
>> b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
>> index 06863d3e4a7d..15094dd8400e 100644
>> --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
>> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
>> @@ -232,6 +232,7 @@
>>               compatible = "arm,mmu-500";
>>               reg = <0 0x9000000 0 0x400000>;
>>               dma-coherent;
>> +            stream-match-mask = <0x7f00>;
>>               #global-interrupts = <2>;
>>               #iommu-cells = <1>;
>>               interrupts = <0 142 4>, /* global secure fault */
>>
\
 
 \ /
  Last update: 2018-09-19 16:07    [W:0.074 / U:1.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site