[lkml]   [2018]   [Sep]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH 2/2] video: ssd1307fb: Do not hard code active-low reset sequence
On 19.9.2018 14:12, Fabio Estevam wrote:
> Hi Michal,
> On Wed, Sep 19, 2018 at 6:18 AM, Michal Vokáč <> wrote:
>> The SSD130x OLED display reset signal is active low. Now the reset
>> sequence is implemented in such a way that users are forced to
>> define reset-gpios as GPIO_ACTIVE_HIGH in DT to make the reset work.
>> Do not hard code the active-low sequence into the driver but instead
>> allow the user to specify the gpio as GPIO_ACTIVE_LOW to reflect
>> the real world.
>> The only single in-tree user of the display is converted and builds
>> fine.
>> Signed-off-by: Michal Vokáč <>
>> ---
>> I am not really sure wheater this should be in one commit or the DT
>> changes should be done in separate commit. Just tell me and I will
>> split/merge the changes as you want. Thanks.
> Please separate in two patches: one for the dts and another for the driver.

OK, thank you. I will send v2 shortly.


 \ /
  Last update: 2018-09-19 14:58    [W:0.047 / U:18.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site