lkml.org 
[lkml]   [2018]   [Sep]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 21/21] arm64: dts: ls104x: make dma-coherent global to the SoC
Date
From: Laurentiu Tudor <laurentiu.tudor@nxp.com>

These SoCs are really completely dma coherent in their entirety so add
the dma-coherent property at the soc level in the device tree and drop
the instances where it's specifically added to a few select devices.

Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 5 +----
arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 1 +
2 files changed, 2 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 3b7b2e60bd9a..d02106cb2116 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -215,6 +215,7 @@
#size-cells = <2>;
ranges;
dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>;
+ dma-coherent;

clockgen: clocking@1ee1000 {
compatible = "fsl,ls1043a-clockgen";
@@ -680,7 +681,6 @@
reg-names = "ahci", "sata-ecc";
interrupts = <0 69 0x4>;
clocks = <&clockgen 4 0>;
- dma-coherent;
};

msi1: msi-controller1@1571000 {
@@ -715,7 +715,6 @@
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
- dma-coherent;
iommu-map = <0 &mmu 0 1>;
num-lanes = <4>;
bus-range = <0x0 0xff>;
@@ -741,7 +740,6 @@
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
- dma-coherent;
iommu-map = <0 &mmu 0 1>;
num-lanes = <2>;
bus-range = <0x0 0xff>;
@@ -767,7 +765,6 @@
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
- dma-coherent;
iommu-map = <0 &mmu 0 1>;
num-lanes = <2>;
bus-range = <0x0 0xff>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 890d1565791f..3bdea0470f69 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -188,6 +188,7 @@
#size-cells = <2>;
ranges;
dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>;
+ dma-coherent;

ddr: memory-controller@1080000 {
compatible = "fsl,qoriq-memory-controller";
--
2.17.1
\
 
 \ /
  Last update: 2018-09-19 14:37    [W:0.398 / U:3.432 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site