[lkml]   [2018]   [Sep]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH 2/2] video: ssd1307fb: Do not hard code active-low reset sequence
Hi Michal,

On Wed, Sep 19, 2018 at 6:18 AM, Michal Vokáč <> wrote:
> The SSD130x OLED display reset signal is active low. Now the reset
> sequence is implemented in such a way that users are forced to
> define reset-gpios as GPIO_ACTIVE_HIGH in DT to make the reset work.
> Do not hard code the active-low sequence into the driver but instead
> allow the user to specify the gpio as GPIO_ACTIVE_LOW to reflect
> the real world.
> The only single in-tree user of the display is converted and builds
> fine.
> Signed-off-by: Michal Vokáč <>
> ---
> I am not really sure wheater this should be in one commit or the DT
> changes should be done in separate commit. Just tell me and I will
> split/merge the changes as you want. Thanks.

Please separate in two patches: one for the dts and another for the driver.


 \ /
  Last update: 2018-09-19 14:12    [W:0.065 / U:9.880 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site