[lkml]   [2018]   [Sep]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH v2 0/4] Fix A64/R40 HDMI PHY device tree binding
On Sun, Sep 16, 2018 at 12:34:05PM +0800, Icenowy Zheng wrote:
> When adding support for A64 HDMI PHY in 4.19, we assumed that the two
> PLL-VIDEOs can both feed the HDMI PHY clock. However experiments show
> that the mux bit discovered in R40 blob is not applicable on A64. This
> is not discovered, as normally with a single display pipeline only
> PLL-VIDEO0 will be used.
> In this patchset the second PLL is dropped, and a binding specially for
> R40 HDMI PHY is added (which seems to have the mux).
> PATCH 1 is dropping second PLL for A64 HDMI PHY, and PATCH 2 to 4
> are adding R40 HDMI PHY binding, as R40 behaves differently with A64
> with this.
> This patchset targets v4.19 fixes tree, because the binding is
> introduced in v4.19, and if we don't fix it there a wrong binding will
> be left in a stable version released. A64 display pipeline support is
> not yet in v4.19, but R40 support is in it.

Applied 1 and 4 as fixes for 4.19, 2 and 3 for 4.20, since they are
not fixes per se, and the R40 display engine is not enabled in 4.19


Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
[unhandled content-type:application/pgp-signature]
 \ /
  Last update: 2018-09-19 11:34    [W:0.112 / U:1.288 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site