[lkml]   [2018]   [Sep]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH 0/2] Add support per ATA port ledtrigger on armada 38x
Hi everyone,

This series adds support LED trigger for each ATA port indicating disk activity
in Armada 38x. I pick up the work done by Daniel Golle which can be found at [1]

Helios4 which is based on Armada 388, has four LEDs designed to indicate disk
activity on each SATA ports. As the final switch (CONFIG_ATA_LEDS) to enable
the codepath by default is no, it should not affect the rest of Armada 38x
based boards.

Notes complains about "WARNING: please write a paragraph that
describes the config symbol fully" but I think the description is clear
enough to ignore the warning.

Some performance number tested on Western Digital Red 2TB WD20EFRX
using fio randrw
* CONFIG_ATA_LEDS disabled and selected trigger is none
read : iops=326
write : iops=109
* CONFIG_ATA_LEDS disabled and selected trigger is disk-activity
read : iops=325
write : iops=108
* CONFIG_ATA_LEDS enabled and selected trigger is ata1
read : iops=325
write : iops=108

Aditya Prayoga (1):
ARM: mvebu: Enable ARCH_WANT_LIBATA_LEDS in Armada 38x

Daniel Golle (1):
libata: add ledtrig support

arch/arm/mach-mvebu/Kconfig | 1 +
drivers/ata/Kconfig | 16 +++++++++++++
drivers/ata/libata-core.c | 56 +++++++++++++++++++++++++++++++++++++++++++++
include/linux/libata.h | 7 ++++++
4 files changed, 80 insertions(+)


 \ /
  Last update: 2018-09-19 05:47    [W:0.129 / U:0.340 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site