[lkml]   [2018]   [Sep]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v3 0/3] Renesas R9A06G032 PINCTRL Driver
This implements the pinctrl driver for the RZ/N1 family of devices, including
the R9A06G032 (RZ/N1D) device.

This series was originally written by Michel Pollet whilst at Renesas, and I
have taken over this work.

Main changes:
- Use standard DT props instead of proprietary ones.
- Replace virtual pins used for MDIO muxing with extra funcs.
- Use pinctrl_utils funcs to handle the maps.
- Remove the dbg functions to keep things simple.
- Change the way the functions are defined so it is easy to check
against the hardware numbering.

- Change to generic rzn1 family driver, instead of device specific.
- Review comments fixed.
- Fix error handling during probe

Phil Edworthy (3):
dt-bindings: pinctrl: renesas,rzn1-pinctrl: documentation
pinctrl: renesas: Renesas RZ/N1 pinctrl driver
ARM: dts: r9a06g032: Add pinctrl node

.../bindings/pinctrl/renesas,rzn1-pinctrl.txt | 129 +++
arch/arm/boot/dts/r9a06g032.dtsi | 8 +
drivers/pinctrl/Kconfig | 10 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/pinctrl-rzn1.c | 926 ++++++++++++++++++
include/dt-bindings/pinctrl/rzn1-pinctrl.h | 141 +++
6 files changed, 1215 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.txt
create mode 100644 drivers/pinctrl/pinctrl-rzn1.c
create mode 100644 include/dt-bindings/pinctrl/rzn1-pinctrl.h


 \ /
  Last update: 2018-09-17 18:36    [W:0.080 / U:4.676 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site