lkml.org 
[lkml]   [2018]   [Sep]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [alsa-devel] [PATCH 2/2] ASoC: max98927: Add reset-gpio support
Hi Mark,
Do you have any concern about this patch ?

Thanks!
On Thu, Sep 13, 2018 at 12:47 AM Rohit Kumar <rohitkr@codeaurora.org> wrote:
>
>
>
> On 9/12/2018 5:49 PM, Cheng-Yi Chiang wrote:
> > Toggle reset line in max98927_i2c_probe.
> > Use a list to store max98927 instances so we do not toggle reset line
> > again if more than one instances share the same reset line.
> >
> > Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
> Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
>
> > ---
> > sound/soc/codecs/max98927.c | 78 +++++++++++++++++++++++++++++++++++++++++++++
> > sound/soc/codecs/max98927.h | 2 ++
> > 2 files changed, 80 insertions(+)
> >
> > diff --git a/sound/soc/codecs/max98927.c b/sound/soc/codecs/max98927.c
> > index 941712058a8f5..789b27cdfd9e0 100644
> > --- a/sound/soc/codecs/max98927.c
> > +++ b/sound/soc/codecs/max98927.c
> > @@ -11,6 +11,7 @@
> > */
> >
> > #include <linux/acpi.h>
> > +#include <linux/delay.h>
> > #include <linux/i2c.h>
> > #include <linux/module.h>
> > #include <linux/regmap.h>
> > @@ -24,6 +25,11 @@
> > #include <sound/tlv.h>
> > #include "max98927.h"
> >
> > +#define MAX98927_MIN_RESET_US 1
> > +#define MAX98927_RELEASE_RESET_DELAY_US 500
> > +
> > +static LIST_HEAD(reset_list);
> > +
> > static struct reg_default max98927_reg[] = {
> > {MAX98927_R0001_INT_RAW1, 0x00},
> > {MAX98927_R0002_INT_RAW2, 0x00},
> > @@ -877,6 +883,54 @@ static void max98927_slot_config(struct i2c_client *i2c,
> > max98927->i_l_slot = 1;
> > }
> >
> > +static int max98927_i2c_toggle_reset(struct device *dev,
> > + struct max98927_priv *max98927)
> > +{
> > + /*
> > + * If we do not have reset gpio, assume platform firmware
> > + * controls the regulator and toggles it for us.
> > + */
> > + if (!max98927->reset_gpio)
> > + return 0;
> > +
> > + gpiod_set_value_cansleep(max98927->reset_gpio, 1);
> > +
> > + /*
> > + * We need to wait a bit before we are allowed to release reset GPIO.
> > + */
> > + usleep_range(MAX98927_MIN_RESET_US, MAX98927_MIN_RESET_US + 5);
> > +
> > + gpiod_set_value_cansleep(max98927->reset_gpio, 0);
> > +
> > + /*
> > + * We need to wait a bit before I2C communication is available.
> > + */
> > + usleep_range(MAX98927_RELEASE_RESET_DELAY_US,
> > + MAX98927_RELEASE_RESET_DELAY_US + 5);
> > +
> > + /*
> > + * Release reset GPIO because we are not going to use it.
> > + */
> > + devm_gpiod_put(dev, max98927->reset_gpio);
> > +
> > + return 0;
> > +}
> > +
> > +static bool max98927_is_first_to_reset(struct max98927_priv *max98927)
> > +{
> > + struct max98927_priv *p;
> > +
> > + if (!max98927->reset_gpio)
> > + return false;
> > +
> > + list_for_each_entry(p, &reset_list, list) {
> > + if (max98927->reset_gpio == p->reset_gpio)
> > + return false;
> > + }
> > +
> > + return true;
> > +}
> > +
> > static int max98927_i2c_probe(struct i2c_client *i2c,
> > const struct i2c_device_id *id)
> > {
> > @@ -904,6 +958,28 @@ static int max98927_i2c_probe(struct i2c_client *i2c,
> > } else
> > max98927->interleave_mode = 0;
> >
> > + /* Gets optional GPIO for reset line. */
> > + max98927->reset_gpio = devm_gpiod_get_optional(
> > + &i2c->dev, "reset", GPIOD_OUT_LOW);
> > + if (IS_ERR(max98927->reset_gpio)) {
> > + ret = PTR_ERR(max98927->reset_gpio);
> > + dev_err(&i2c->dev, "error getting reset gpio: %d\n", ret);
> > + return ret;
> > + }
> > +
> > + /*
> > + * Only toggle reset line for the first instance when the
> > + * reset line is shared among instances. For example,
> > + * left and right amplifier share the same reset line, and
> > + * we should only toggle the reset line once.
> > + */
> > + if (max98927_is_first_to_reset(max98927)) {
> > + dev_info(&i2c->dev, "%s: toggle reset line\n", __func__);
> > + ret = max98927_i2c_toggle_reset(&i2c->dev, max98927);
> > + if (ret)
> > + return ret;
> > + }
> > +
> > /* regmap initialization */
> > max98927->regmap
> > = devm_regmap_init_i2c(i2c, &max98927_regmap);
> > @@ -934,6 +1010,8 @@ static int max98927_i2c_probe(struct i2c_client *i2c,
> > if (ret < 0)
> > dev_err(&i2c->dev, "Failed to register component: %d\n", ret);
> >
> > + list_add(&max98927->list, &reset_list);
> > +
> > return ret;
> > }
> >
> > diff --git a/sound/soc/codecs/max98927.h b/sound/soc/codecs/max98927.h
> > index 538992a238b28..d48f61f6c3ba5 100644
> > --- a/sound/soc/codecs/max98927.h
> > +++ b/sound/soc/codecs/max98927.h
> > @@ -275,5 +275,7 @@ struct max98927_priv {
> > unsigned int master;
> > unsigned int digital_gain;
> > bool tdm_mode;
> > + struct gpio_desc *reset_gpio;
> > + struct list_head list;
> > };
> > #endif
>

\
 
 \ /
  Last update: 2018-09-17 11:01    [W:0.147 / U:0.904 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site